New Active speakers buzzing noises. How to connect to a computer and sound clear?

I bought a pair of alto tx10 powered speakers which have xlr input only as a connection. My main source of sound output is my computer with a 3.5mm jack. At first I bought a 6m xlr to rca then I used an rca to jack adapter like this Attachment 26901 But the sound was terrible and was having too much interfearence and buzzing and humming even at low volume. I then went to the shop and returned the cable but don't know what shall I buy to make it work. Does a balanced cable solve this issue? Should I buy a pa mixer to use balanced cables from the mixer to speakers like the Alto ZMX52 Attachment 26902 or a ZMX862 Attachment 26903? Then I can buy a pair of 6.3mm jack to xlr balanced cables and run to the speakers.

Please I need some help on this.

http://www.digitaldjtips.com/2011/07...ables-for-djs/

Analog XLR connections are only for carrying a balanced mono channel. Cables are not balanced; connections are balanced. Plugging an XLR cable into an unbalanced output does not magically balance the connection. You should use a sound card with balanced outputs to plug into your speakers. Cheap controllers with built in sound cards tend to only have unbalanced outputs, but you can get a better sound card with balanced outputs for around the price of a cheap controller. I recommend a Focusrite Scarlett 2i4. Plugging the output of your onboard sound card, which isn't good quality to start with, into a cheap mixer will add more noise and distortion. Plugging a decent sound card with balanced outputs straight into your speakers will sound quite a lot better.

The noise you hear connecting to your speakers with an unbalanced signal is likely ground loop hum, which is rarely an issue with balanced connections.

I solved the problem. I bought a mixer and used proper cordial cables. From the pc to the mixer, I used a 3m stereo 1/8" trs to 1/4" y-adaptor to the mixer and from 1/4" trs to xlr male balanced to the speakers. This setup seems to fixed my noise problem because now the sound is crystal clear.

I swear this was all you needed. Attachment 26908

Yes but how can it split for two speakers when they are 6 feet apart? I needed the mixer anyways for future equipment.

Quote:

---

Originally Posted by Naughtvboy

the sound is crystal clear.

---

A good sound card is essential for good sound from a computer. No onboard sound card is crystal clear, especially not going through a cheap mixer.

The mixer I bought is an alto zmx862. I think it is a good mixer for my use.