Jester's Mighty X1 MkIII (2 Deck, FX & Mixer Modes, Preparation)

Hey folks, here is the latest version of my X1 Mapping, designed for those who wish to use the X1 as a mixer. Video is uploading.

Notes:
- 2 Modes, FX (Standard) & EQ (Mixer)
- Crossfader can be used in any mode
- Preparation functions
- General tweaks

[FX ON]
- Toggles FX/EQ Modes
- Switching to EQ Mode engages filter, FX Mode disengages filter
- SHIFT + [FX ON] resets Gain & Filter

[DRY/WET]
- FX Mode: [DRY/WET] for FX Unit 1
- EQ Mode: Filter Adjust SHIFT + [DRY/WET] Gain Adjust

[1-3]
FX Mode - Effects activate 1-3 SHIFT + [1-3] cycles the available effects.
EQ Mode - EQ Kill Low, Mid, High (also mid low/high if you use the Xone eq)
SHIFT + [1-3] in EQ Mode activates Effects 1-3 just as if you were in FX Mode
Removed FX Unit 1&2 Kill when swapping modes, due to "customer feedback"

- Right [BROWSE] is normal playlist scrolling
- Left [BROWSE] switches to browser mode as well as normal scrolling
- Loading either deck switches back to deck view
- SHIFT + [LOAD] toggles between Deck/Browser views
- SHIFT + [BROWSE] scrubs through the track
- In EQ Mode, [FX1] & [FX2] are volume controls, with some led feedback (Full volume bright, low volume dim)

Crossfader:
- Works in any mode
- SHIFT + Left [FX1] & Right [FX2] activates the Crossfader
- SHIFT + Left [FX1] & Right [FX1] activates the Auto XF

SHIFT + Left [LOOP SIZE]
- Beatjump on focus deck (+/- 32)

SHIFT + Right [LOOP SIZE]
- Deck Zoom In/Out

SHIFT + Left [IN/OUT]
- Move Grid

SHIFT + Left [TEMPO BEND +/-]
- Adjust Analyzed BPM

SHIFT + [Sync]
- Drop Grid Marker

SHIFT + [CUE] + [CUP]
- Previous/ Next Cue point

- Also some miscellaneous features mentioned in coming video

http://www.youtube.com/watch?v=U-644eQsOdk

Thank you for making the video and explaining the features. :)

yeah i thought i would be a lot easier than a confusing diagram (plus, i am lazy)
cheers.

New version 3.1

ADDED - Switching deck to FX mode now resets filter position
- Loading deck resets deck zoom to -.75 (default position)
- Loading deck resets crossfader to centre position
- Loading deck in Mixer Mode makes deck volume 0 (the idea being if you use the FX mode when you prep tracks, the deck volume stays up making things a bit easier)
- SHIFT + PLAY toggles BPM lock on/off
- In the zoomed preparation mode, tempo bend can be used to fine tune the playhead position before
dropping a grid marker

Mapping Site updated https://maps.djtechtools.com/mappings/1141

I am a little bit confused about switching presets. It says to place both FX1 and FX2 (the top buttons) to ON to go into mixing mode. This works but when I turn them off to get out of mixing mode, the FXs turn off. Is there a way to switch with a shift button so that I can still keep FXs on in either FX or mixing mode?

Hi there,
the modes are independent for each deck so you could have deck a in mixer mode and deck b in fx mode, for example.
the fx units remain on when switching between modes if you have them set, and you can still activate the effects by holding shift+1-3 kill.
what traktor version are you on? i haven't been able to replicate your problem, this mapping was made in tsp 2.5.1, if you are using 2.6+ there have been more changes to the way mappings work which i haven't tested.

Updated + Tweaked For TP 2.6.4

Changes in Mk IV

- Changed LOOP SET To (HOLD)
- Removed Loop Active LED Feedback
- Added Post Fader VU Meters To Transport Section
- Removed BPM LOCK Command From "SHIFT+PLAY" + Replaced With A JUMP TO TRACK START Command
- Removed Clashing Filter Commands
- Changed GAIN ADJUST Command To L/R DRY/WET In EQ Mode
- Added Automatic Cue Panel Selector When Loading Track
- Removed BEATJUMP Command From "SHIFT+LEFT SIZE" + Replaced With A FAVORITES SELECTOR Command
- Changed ONLY BROWSER TOGGLE to "RIGHT BROWSE" Only
- Removed SELECT UP/DOWN BROWSER Command From "LEFT BROWSE" + Replaced With TREE SELECT UP/DOWN
- Added LIST EXPAND/COLLAPSE Command To "SHIFT+LEFT LOAD"
- Removed VOLUME RESET Command When Loading A Track In Internal Mode

https://maps.djtechtools.com/mappings/1141

ADDED IN VERSION 4.0.2


- Added DECK VOLUME Reset Command to SHIFT+Left FX1/RIGHT FX1 (EQ Mode)
- Tweaked Post fader VU Meter Sensitivity
- Removed Pointless Beat Phase Monitor

Awesome stuff, you're making my life so easy.

One thing that may not be troubleshootable: when you switch to FX mode it cuts the fillter but also disables shift+dry wet for Gain. When you turn EQ mode on it enables the filter and the second you touch the dry-wet it'll move the filter knob to the point of the gain you have set. So if you run with the Gain on +5 or what not then your filter is going to kick in.

I know it's probably not possible, or if it is to map it to another, but is it possible to smoothe out how those two FX ons work so that you can always control them to their full extent? I have no problem manually moving the gain to what it should be set as but if I have the filter off I can't move the gain at all.