TRAKTOR recording question

[Maeglin]

Hey guys, kinda noob question but used cdj all my life and I'm not getting the point. I hook up the following setup for a young cousin thats now interested in EDM:

.TRAKTOR PRO 2.5.1
.TRAKTOR AUDIO 2
.NUMARK MIXTRACK

I've set it to Internal Recording (since there's no inputs in TA2 I can't route it to Audacity and record externally right?) but when the crossfader is in the middle I can clearly hear the sound coming from the opposite channel, even with the eq faders cranked down. When I put the crossfader all the oppositte way it gets clear, but mix that way sucks. What am I not getting?

Thanks in advance!

[fullenglishpint]

I'm not sure I fully understand what you're saying, do you mean the channel faders don't work? Try to explain a little better.

For starters make sure you're in INTERNAL mixing mode rather than external.

[Maeglin]

The EQ faders do work, but the sound "leaks" off the channel B, for example, a lot when the crossfaders isn't 100% left to channel A. Is it the lack of a proper mixer?

[Ross]

Make sure you've got your cross fader assigned correctly within Traktor.

[MaxOne]

Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO

[Maeglin]

Make sure you've got your cross fader assigned correctly within Traktor.

It's correctly assigned. Look, if u mix without a real mixer, using traktor internal mode, the sound always leaks when the vhannel volume is up, but the eq faders all the way down?

[Maeglin]

Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO

Thanks for the tips. I'm not from a english speaking country, sorry for misleading terms

[Maeglin]

Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO

There's no Z ISO mode in EQ Selection here. Just NUO, CLASSIC, XONE and P600

[Nicky H]

Traktor 2.6 added Z and P800 which totally kill the sound..
The other eq's are not "full" kills - try updating to 2.6

[Maeglin]

Traktor 2.6 added Z and P800 which totally kill the sound..
The other eq's are not "full" kills - try updating to 2.6

=D

Thats it, solved!

Thanks to all