Crossfader centers with the slightest touch with Vci-100

[misha_val]

When I move the crossfader on my Vci-100 it automatically brings it to the center in Traktor Pro. How do I make it so Traktor Pro follows what the Vci-100's crossfader is doing? I'm using Ean Golden's mapping.

[Jester]

Set the interaction mode to direct, controller type analog fader/knob, and soft takeover checked (optional)

[sm00sh]

is the crossfader curve of the vci perhaps set to the steepest curve setting?

[luv2xra]

Check the curve setting

[pilmat]

It looks like your VCI fader setting is the issue. On the back of the unit near the power swtich is a black knob. Turn it all the way to one end and try it. Then turn it the other way and try it. Now you know what the two extremes are, pick a setting in between that you like.

One note is that if you tend to use the channel faders for mixing, try setting the cross fader with a small "full" band in the center, that way you don't need to have the cross fader dead nuts to get perfectly even sound.

Cheers, Phil.

[misha_val]

Big ups! Problem solved