Vci-100 1.4 (hd) firmware upgrade - Page 30
Page 30 of 40 FirstFirst ... 20262728293031323334 ... LastLast
Results 291 to 300 of 394
  1. #291
    DJTT Infectious Moderator photojojo's Avatar
    Join Date
    Apr 2010
    Location
    Sherman, TX
    Posts
    13,925
    Chris Jennings FHP

    Podcast - Soundcloud - Mixcloud - Beatport Charts - x

  2. #292
    Tech Convert
    Join Date
    Feb 2010
    Posts
    18

    Question

    Quote Originally Posted by Jon-G View Post
    Ok just read the whole of this thread (eyes are bleeding) after updating to 1.4 yesterday. First and foremost, thanks to DJTT and everyone here for keeping this amazing controller alive and fully kickin!

    Reason for this post (and the long read) was to see if anyone else has discovered the problem Iv come across tonight while playing with the new FW/TSI (3-6-4_PC) whereby, when in Fader FX mode the jog dial still has an effect on the pitch bend when held on for several seconds? I didnt see anyone report this already. Anyone any ideas how to fix this?
    Is anyone else experiencing this?

  3. #293
    DJTT Tankard fullenglishpint's Avatar
    Join Date
    Aug 2010
    Location
    St Albans, UK
    Posts
    7,097

    Default

    Quote Originally Posted by Jon-G View Post
    Is anyone else experiencing this?
    can you post a video of this? are you moving the jogwheel or just touching it?
    TSP 2 | Serato DJ | Live 8 | MBP (SSD + HDD) | AIAIA TMA-1 Fool's Gold Edition | 1200 Mk2s | MidiFighter | KRK RP5
    Xone: DB4 | Pioneer CDJ-2000 Nexus
    DJTT FAQ | Read my guide to AUDIO CABLES

  4. #294
    Tech Convert
    Join Date
    Feb 2010
    Posts
    18

    Default

    Quote Originally Posted by fullenglishpint View Post
    can you post a video of this? are you moving the jogwheel or just touching it?

    Sorry man, I dont have the means to make a video which will be good enough to demonstrate it.

    Im touching and moving it when I get the problem

    Easiest way to replicate it is trying to use the beatmasher in FaderFX mode and play with the wet/dry using the jog, you can hear it bending as its mashing..

  5. #295
    Tech Convert
    Join Date
    Dec 2009
    Posts
    6

    Default

    Hey,
    I´ve got a question.... is it clever to upgrade my Firmware to 1.4 if i had the Traktor Pro Arcade V3 Overlay? Or should i upgrade to the 1.3 Firmware?

    mfg

  6. #296
    Tech Convert
    Join Date
    Feb 2010
    Posts
    18

    Default

    Quote Originally Posted by ruklaw View Post
    OK, it maybe wasn't quite as hard as I feared as I've now fixed the problem.

    So, for your djing pleasure, attached is a TSI which:
    • Turns back on pitch bend outer wheel in Vinyl mode
    • Turns off the pitch bend outer wheel when not in vinyl mode, so you can turn off vinyl mode in heavy bass situations and not have to worry about sync drift
    • Fixes the bug whereby the inner wheel of deck A was much lower sensitivity than the others when in pitch bend (not vinyl) mode.


    I recommend you import the DJTechTools TSI first, then import my one to apply the fixes.
    Let me know if you have any issues- no promises I can help with them, but I'll do my best.
    Im trying to figure out what it was that you changed to correct these problems in the DJTT TSi. I have been using your tsi on top of the DJTT one because I want the pitch bend back in scratch mode, and the reason Im looking into the config again is that Id like to turn down the sensitivity of the outer wheel (when in scratch mode) as its very difficult to fine tune the phase as it stands. Can you give me a pointer as to where to look. I was trying to do a compare of the tsi files in notepad++ but your file doesnt seem to be in a standard xml format? But if you could just point me where to configure this through the traktor mapping editor Id really appreciate it!

  7. #297
    Tech Wizard
    Join Date
    Feb 2011
    Posts
    44

    Default

    Quote Originally Posted by photojojo View Post
    how have you done this??????

  8. #298
    DJTT Tankard fullenglishpint's Avatar
    Join Date
    Aug 2010
    Location
    St Albans, UK
    Posts
    7,097

    Default

    Quote Originally Posted by phantom View Post
    how have you done this??????
    it's an easter egg built into the 1.4 FW.
    TSP 2 | Serato DJ | Live 8 | MBP (SSD + HDD) | AIAIA TMA-1 Fool's Gold Edition | 1200 Mk2s | MidiFighter | KRK RP5
    Xone: DB4 | Pioneer CDJ-2000 Nexus
    DJTT FAQ | Read my guide to AUDIO CABLES

  9. #299
    Tech Wizard
    Join Date
    Feb 2011
    Posts
    44

    Default

    what do you mean?

  10. #300
    Tech Wizard ricoot's Avatar
    Join Date
    Sep 2010
    Location
    Holland
    Posts
    87

    Default

    oke, after a 10th upgrade still no working key-lock / sync as in the video.

    windows xp - serial to serial cable

    Code:
    Erasing 9 blocks from device
    Erasing... 'EB0'...
    Downloaded the operation module
    Erased block EB0 (0x00000000 - 0x00000FFF)
    Erasing... 'EB1'...
    Erased block EB1 (0x00001000 - 0x00001FFF)
    Erasing... 'EB2'...
    Erased block EB2 (0x00002000 - 0x00002FFF)
    Erasing... 'EB3'...
    Erased block EB3 (0x00003000 - 0x00003FFF)
    Erasing... 'EB4'...
    Erased block EB4 (0x00004000 - 0x00004FFF)
    Erasing... 'EB5'...
    Erased block EB5 (0x00005000 - 0x00005FFF)
    Erasing... 'EB6'...
    Erased block EB6 (0x00006000 - 0x00006FFF)
    Erasing... 'EB7'...
    Erased block EB7 (0x00007000 - 0x00007FFF)
    Erasing... 'EB8'...
    Erased block EB8 (0x00008000 - 0x0000FFFF)
    Erase complete
    Processing file :"C:\Documents and Settings\rico\Bureaublad\VCI100-DaveX-1.4.mot"
    Operation on User Flash
    Downloaded the operation module
    Writing image to device... [0x00000000 - 0x0000907F]
    Writing image to device... [0x00009080 - 0x0000917F]
    Writing image to device... [0x00009180 - 0x00009AFF]
    Data programmed at the following positions:
     0x00000000 - 0x0000907F      Length : 0x00009080
     0x00009080 - 0x0000917F      Length : 0x00000100
     0x00009180 - 0x00009AFF      Length : 0x00000980
    38.75 K programmed in 17 seconds
    Image written to device
    i'm clueless...

    NI Kontrol S2
    NI Traktor pro 2
    HD 25-1 II
    Behringer B1030A 5"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •