Download VCI-100 TSI for Traktor Pro (1_3 FX)

[EanGolden]

see, that helped a lot. not in fixing the problem but clearly udnerstanding what everyone was talking about.

a note to everyone reporting bugs

please describe the problem as completely as possible and tell me EXACTLY what you are talking about.

In this case I thought everyone meant the deck C cue section in the FX area- not deck C cue while in deck C control mode. Yes, definitely a bug and easily fixed. Thanks for the feedback guys.

[Zac Kyoti]

So I haven't seen too much dialog about this, but I agree we should get it started. Right now it seems there is no way to duplicate a deck and have it play in sync instantly in Traktor Pro as it did in T3.3 or T3.4. I developed a workaround for TPro in that the control used to copy decks doubles as a play start (hold, copy, release and press again). The same note number also needs to be assigned to a "sync" command (not "phase sync"). Not perfect, but it does the job. Ex: on my tsi, the preview button (or deck copy on Ean's) is held, while holding, the copy to button is pressed, then quickly release all and hit the preview button again. The track is copied, synced and playing, exactly matching the source. This is the best way I've found to deal with it so far.

[looper]

Hey Zak It sounds great, can You upload the tsi? Thanks

[Anthony More]

Thanks for bugs fixing,

I've managed to give the juggle button(note E5) a toggle function (in a text file) and I reset the juggle rotary (cc 89),
when I push now the juggle button all lights work well as before
and the 8 cue buttons are in juggle mode.(play,sync doesnt work then),
but my stored cue points don't react.
somebody know what to do,
maybe I overlooked something,
or has it something to do with the fact that you cannot activate modifiers with a toggle function in
Traktor Pro...

[Zac Kyoti]

Hey Zak It sounds great, can You upload the tsi? Thanks

Yah man, you can find it in the controller mappings section. It's the only one I have posted right now. Let me know what you think!

[Zac Kyoti]

or has it something to do with the fact that you cannot activate modifiers with a toggle function in
Traktor Pro...

You can definitely use modifiers in a toggle mode. Here's a basic example. Program two commands:

1) "Modifier 1" contains the modifier 1=0, set value to 1.
2) "Modifier 1" contains the modifier 1=1, set to value 0.

Adapt the example to your tsi, and you can add a Modifier command with a value of "output" to make the LED turn on and off. There's the toggle!

[byzantine]

for all you people out there who don't need a Deck C (like me) I've edited the great DJTT-tsi. I`ve deleted all Deck C-controls and reconfigured the Deck C-modifier (right sync-button on the silver-VCI) for raw pitching. so if you like to beatmatch manually (which I often do) you can first try to get to the bpm-region of the other song by holding the modifier and then use the pitch-fader and if you are getting nearer you release the modifier for very fine pitching. and when you take the pitch-fader to the middle-position afterwards it jumps back to 0,0%.
I think this is nice, if you are new to djing and want to learn about manual beatmatching....

here's the file: http://www.megaupload.com/?d=44NU35PY

[Anthony More]

You can definitely use modifiers in a toggle mode. Here's a basic example. Program two commands:

1) "Modifier 1" contains the modifier 1=0, set value to 1.
2) "Modifier 1" contains the modifier 1=1, set to value 0.

Adapt the example to your tsi, and you can add a Modifier command with a value of "output" to make the LED turn on and off. There's the toggle!

I used the new tsi file and the modifier#3 for the cue/juggle is M3=1
and for the normal functions(play,sync,etc) its M3=0
But the button (note E5)cue/juggle has no M-value.(i tried M3=1 and M3=0,
then nothing will work)

[Anthony More]

You can definitely use modifiers in a toggle mode. Here's a basic example. Program two commands:

1) "Modifier 1" contains the modifier 1=0, set value to 1.
2) "Modifier 1" contains the modifier 1=1, set to value 0.

Adapt the example to your tsi, and you can add a Modifier command with a value of "output" to make the LED turn on and off. There's the toggle!

Problems solved, thanks Zac,for bringing me on the right track!

When you want a toggle function,you have to take ;
"Type" Direct(I took Toggle) and assign it 2 times to the same knob (note),
and then the commands you wrote.That simple
Thanks again

[Anthony More]

If you change the interaction mode(Type) from toggle to hold,
Then you don't have to push 4-times to turn snap mode(note A#4) on and off.