Jog wheel B & pitch problem
Results 1 to 4 of 4
  1. #1
    Tech Convert
    Join Date
    Jan 2010
    Posts
    8

    Exclamation Jog wheel B & pitch problem

    Hello all DJTT community. Hope you can help me fix those problems! I have a VCI-100 with 1.1 fw and I'm using the latest TSI from here.

    The problem that I have it that the jog wheel of deck B in scratch mode is very unprecise and unsensible. It's very annoying. I don't think that is a hardware problem because the jog works fine with scratch button off. Jog A works fine on both modes. Do you think that by upgrading to 1.4 fw it will solve it??

    The other problem that I found are the pitch faders. When you have synced a deck and you have the pitch fader whenever out of the centre, when moving the pitch fader, the pitch "jumps" and increases a lot. Do you think 1.4 will solve it too??

    Thanks very much, and sorry for my english.

  2. #2
    Tech Mentor ZachDero's Avatar
    Join Date
    Feb 2009
    Location
    San Francisco
    Posts
    174

    Default

    The 1.4 firmware upgrade increases pitch fader and jog wheel sensitivity and accuracy. Upgrading your firmware should solve your problems, unless it is a hardware issue.

  3. #3
    DJTT Infectious Moderator photojojo's Avatar
    Join Date
    Apr 2010
    Location
    Sherman, TX
    Posts
    13,939

    Default

    The latest tsi from here was designed for the 1.4 firmware so there may be some conflicts with 1.1. You can check the rotary sensitivity for that jog in the tsi to make sure it is the same as the other jog. You may also need to clean and lube the contacts.

    http://www.djtechtools.com/2010/08/1...ers-jog-wheel/

    All that said updating will make it better for various reasons.
    Chris Jennings FHP

    Podcast - Soundcloud - Mixcloud - Beatport Charts - x

  4. #4
    Tech Convert
    Join Date
    Jan 2010
    Posts
    8

    Default

    I've checked the sensivity and it's the same on both. But I don't know why in scratch mode it works bad and with scratch off it works fine just like the other jog. But thank you all for the replies, I'll consider buying a fw upgrade kit.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •