HELP!! Can upgrade to 1.3 but not 1.4
Results 1 to 2 of 2
  1. #1

    Default HELP!! Can upgrade to 1.3 but not 1.4

    Have tried to upgrade to firmware v1.4, 1.3.1, 1.3.2 & 1.3.3 but was unsuccessful. I get the message below which, although it says the upgrade was a success, it actually wasn't

    Flash Development Toolkit and flash programming components
    are provided without support

    OS: Windows XP [Admin]
    FCF Settings Applied: H8/3052F, (C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\)
    FDT API initialised: version 4, 05, 00, 008
    FCF Settings Applied: H8/3052F, (C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\)
    Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
    Connecting to device 'H8/3052F' on 'COM2'
    Configuration:
    'BOOT Mode' connection - using emulated interface
    Opening port 'COM2' ...
    Loading Comms DLL
    Loaded Comms DLL
    Initiating BOOT SCI sequence
    Attempting 9600
    Received immediate response from device: 0xAA
    Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde'
    Downloading and verifying micro kernel...
    Device is erasing...
    Erase Timeout value set to 21 seconds
    Erase Successful
    micro-Kernel download successful
    Sending inquiry for getting line size
    Buffer size has been set to default (128 bytes)
    Sending selection of device command
    Selection of Device - Device selected, code 0302
    Sending selection of clock mode
    Sending selection of clock mode
    Selection of Clock Mode - Clock selected, code 0
    Changing baud rate to 38400 bps
    Set baud rate value = 38400
    Downloading main kernel 'C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde'
    Main kernel download complete...
    Connection complete
    Processing file :"I:\VCI1001_4 (1)\VCI100-DaveX-1.4.mot"
    Operation on User Flash
    Downloaded the operation module
    Writing image to device... [0x00000000 - 0x0000907F]
    Writing image to device... [0x00009080 - 0x0000917F]
    Writing image to device... [0x00009180 - 0x00009AFF]
    Data programmed at the following positions:
    0x00000000 - 0x0000907F Length : 0x00009080
    0x00009080 - 0x0000917F Length : 0x00000100
    0x00009180 - 0x00009AFF Length : 0x00000980
    38.75 K programmed in 109 seconds
    Image written to device
    Disconnecting
    Disconnected


    There are only 3 lines with "Writing image to device...." whereas (I think) there should be 6.

    Bizarrely I tried to upgrade to 1.3 and that was successful:

    Flash Development Toolkit and flash programming components
    are provided without support

    OS: Windows XP [Admin]
    FCF Settings Applied: H8/3052F, (C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\)
    FDT API initialised: version 4, 05, 00, 008
    FCF Settings Applied: H8/3052F, (C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\)
    Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
    Connecting to device 'H8/3052F' on 'COM3'
    Configuration:
    'BOOT Mode' connection - using emulated interface
    Opening port 'COM3' ...
    Loading Comms DLL
    Loaded Comms DLL
    Initiating BOOT SCI sequence
    Attempting 9600
    Received immediate response from device: 0xAA
    Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde'
    Downloading and verifying micro kernel...
    Device is erasing...
    Erase Timeout value set to 21 seconds
    Erase Successful
    micro-Kernel download successful
    Sending inquiry for getting line size
    Buffer size has been set to default (128 bytes)
    Sending selection of device command
    Selection of Device - Device selected, code 0302
    Sending selection of clock mode
    Sending selection of clock mode
    Selection of Clock Mode - Clock selected, code 0
    Changing baud rate to 38400 bps
    Set baud rate value = 38400
    Downloading main kernel 'C:\Program Files\Renesas\FDT4.05\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde'
    Main kernel download complete...
    Connection complete
    Processing file :"I:\vci-100se_13_firmware\VCI-100SE_1.3_Firmware.mot"
    Operation on User Flash
    Downloaded the operation module
    Writing image to device... [0x00000000 - 0x000000FF]
    Writing image to device... [0x00000200 - 0x0000647F]
    Writing image to device... [0x00008000 - 0x0000807F]
    Writing image to device... [0x00009000 - 0x0000907F]
    Writing image to device... [0x00009080 - 0x0000917F]
    Writing image to device... [0x00009180 - 0x00009AFF]
    Data programmed at the following positions:
    0x00000000 - 0x000000FF Length : 0x00000100
    0x00000200 - 0x0000647F Length : 0x00006280
    0x00008000 - 0x0000807F Length : 0x00000080
    0x00009000 - 0x0000907F Length : 0x00000080
    0x00009080 - 0x0000917F Length : 0x00000100
    0x00009180 - 0x00009AFF Length : 0x00000980
    27.75 K programmed in 77 seconds
    Image written to device
    Disconnecting
    Disconnected


    Does anyone know why it would work for 1.3 and not the rest? Any solutions to my problem would be much appreciated...have spent days trying to solve it

  2. #2

    Default

    Bump. Does anyone have any ideas? I'm stumped!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •