Results 1 to 7 of 7
  1. #1
    DJTT Scribe Mod smiTTTen's Avatar
    Join Date
    Jan 2011
    Location
    Then: UK. Now: US.
    Posts
    1,938

    Default Is this the ultimate Technics customization menu?

    http://www.djhenraycustoms.com/SERVI...D_PRICING.html

    1. RCA'S REPLACED/INTERNAL GROUND PART/LABOR - $45.00
    (THIS INCLUDES A NEW SET OF PREMIUM RCA'S & ELIMINATION GROUND WIRE)

    2. WRAP (CUSTOM) MATERIAL & DESIGN PART& LABOR - $150.00
    (THIS CONSISTS OF GRAPHIC DESIN, FULL DISASSEMBLY, WRAPPING & REASSEMBLY OF UNIT AND THE COST OF HEAVY DUTY 3M CAR WRAP MATERIAL. NOTE: MUST PURCHASE NEW PITCH CONTROL DECAL WHEN GETTING TURNTABLE WRAPED)

    3. PITCH CONTROL METAL DECAL - $20.00
    (THIS METAL DECAL MUST BE PURCHASED WHEN WRAPPING OR PAINTING)

    4. CUSTOM PAINT ON TONE-ARM BASE PLATE PART/LABOR - $40.00
    (NOTE: THIS INCLUDES DESOLDERING OF TON-ARM AND COMPLETE DISASSEMBLY OF THE TONE-ARM BASE)

    5. TECHNIC DECAL REPLICAS - $7.00
    (THIS INCLUDES REPLICA TECHNICS LABELS FOR TURNTABLE BASE, ONLY NEEDED WHEN TURNTABLE IS PAINTED)

    6. CUSTOM POWDER COATING (LABOR/PAINT) - $150.00
    (THIS CONSISTS OF FULLY DISASSEMBLING THE UNIT, PREPING FOR PAINT, SENDING OUT TO GET PROFESSIONALLY POWDER COATED & REASSEMBLING)

    7. LED POP UP LIGHT MOD (PART/LABOR) - $35.00
    (NOTE: THIS INCLUDES FULL CONVERSION KIT OF POP UP LIGHT, FROM STANDARD LIGH TO HIGHER VOLTAG LED LIGHT)

    8. LED PITCH CONTROL LIGHT MOD (PART/LABOR) - $20.00
    (NOTE: THIS CONSISTS OF 1 NEW LED BULB INSTALLED FOR ZERO MARK ON TECHNICS PITCH CONTROL)

    9. LED LIGHT FOR 33/45 RPM MOD (PART/LABOR) - $20.00
    (NOTE: THIS CONSISTS OF 2 NEW LED BULBS INSTALLED FOR THE 33/45 BUTTONS)

    10. LED ON/OFF KNOB LIGHT MOD (PART/LABOR) - $20.00
    (NOTE: THIS CONSISTS OF 4 NEW LED BULBS INSTALLED FOR THE ON/OFF KNOB OF THE TURNTABLE)

    11. ELIMINATING CLICK ON PITCH CONTROL (LABOR) - $15.00
    (THIS CONSISTS OF COMPLETE DISASSEMBLY OF PITCH CONTROL FADER & REMOBVING BALL BEARING FOR A SMOOTH PITCH CONTROL, NO CLICK AT THE ZERO MARK)

    12. ON/OFF SWITCH KNOB REPLACEMENT (PART/LABOR) - $35.00
    (INCLUDES PART AND LABOR)

    13. POP UP LIGHT REPLACEMENT STANDARD BULB (PART/LABOR) - $25.00
    (THIS CONSISTS OF REPLACING THE BULB ON THE POP UP LIGHT WITH A STANDARD TECHNICS BULB, NOT LED)

    14. TONE ARM REPLACED (PART/LABOR) - $125.00
    (THIS CONSISTS OF DISASSEMBLY OF TONE-ARM AND DESOLDERING AND RE-SOLDERING OF NEW TONE-ARM IN PLACE, TESTING OUT AND RE-ASSEMBLY)

    15. TONE ARM REST (PART/LABOR) - $18.00
    (THIS INCLUDES PART AND LABOR FOR TONE-ARM REST)

    16. TUNE UP (LABOR) - $25.00
    (INCLUDES CALIBRATING START/STOP, PITCH CONTROL, ADJUSTING & CLEANING TONE-ARM, LUBING BALL BEARING SPINDLE (PLATTER), TESTING RCA'S & GROUND WIRE, DUSTING AND CLEANING ALL CIRCUIT BOARDS)

    17. MAIN CIRCUIT BOARD REPLACEMENT (PART/LABOR) - $140.00
    (THIS CONSISTS OF REPLACING THE WHOLE CIRCUIT BOARD WITH A NEW ONE, COMPLETE DISASSEMBLY AND RE-ASSEMBLY OF UNIT)

    18. PITCH CONTROL REPLACEMENT (PART/LABOR) - $75.00
    (THIS CONSISTS OF DESOLDERING OLD PITCH FADER AN RE-SOLDERING NEW PITCH FADER, CALIBRATING AND DISASSEMBLY AND REASSEMBLY OF UNIT)

    19. INTERNAL GROUNDING - $20.00
    (THIS CONSISTS OF OPENING UNIT UP & GROUNDING FROM THE INSIDE. ELIMINATING THE EXTERNAL GROUND WIRE. WORKS GREAT WITH SERATO)

    20. TECHNIC DECALS FOR PLATTER - $10.00
    (THIS INCLUDES 2 TECHNICS VINYL LABELS, ANY COLOR FOR YOUR PLATTER. GREAT EFFECT)

    21. POWER CORD REPLACEMENT (PART/LABOR) - $15.00
    (THIS INCLUDES ONE BRAND NEW POWER CORD REPLACED, WHITE OF BLACK. (PART/LABOR)

    22. PLATTER PAINT - $25.00
    (THIS INCLUDES YOUR CHOICE OF COLOR, PAINT AND LABOR)

    23. PLATTER LIGHTS (LED'S) HALO - $100.00
    (INCLUDES YOUR CHOICE OF COLOR LED'S CUSTOMIZED UNDER PLATTER LIGHTS. PART/LABOR)

    24. PITCH CONTROL LED LIGHTS - $65.00
    (INCLUDES YOUR CHOICE OF COLOR LED'S CUSTOMIZED UNDER PITCH CONTROL. PART/LABOR)

    25. PITCH CALIBRATION - $20.00
    (INCLUDES LABOR FOR CALIBRATION AN DISASSEMBLY AND RE-ASSEMBLY OF UNIT)

    26. FEMALE RCA PORTS MODIFICATION - $65.00
    (THIS CONSISTS OF INSTALLING 2 FEMALE RCA JACKS ON CABINET TO ALLOW FOR RCA CABLE DISCONNECTION. PART/LABOR)

    27. PREMIUM RCA CABLES 24K GOLD PLATED - $29.00
    (1 SET OF PREMIUM RCA CABLES, 24KT GOLD PLATED CONNECTORS)

    28. STRAIGHT TONE-ARM MODIFICATION - $170.00
    (THIS CONSISTS OF REMOVING ORIGINAL S TONE-ARM REPLACING IT WITH STRAIGHT TONE-ARM. COMPLETE UNIT DISASSEMBLY AND RE-ASSEMBLY IS REQUIRED. PART/LABOR)

    29. SPINDLE REPLACEMENT - $50.00
    (THIS CONSISTS OF DISASSEMBLY AND REASSEMBLY OF UNIT. PART AND LABOR)

    30. PITCH CONROL CIRCUIT BOARD - $50.00
    (PART AND LABOR, REMOVING OLD PITCH CONTROL CIRCUIT BOARD AND REPLACING IT WITH A NEW ONE. COMPLETE DISASSEMBLY AN RE-ASSEMBLY OF UNIT)

    31. RGB PLATTER LIGHTS (HALO) WITH REMOTE - $140.00
    (THIS CONSISTS OF CUSTOMIZED UNDER PLATTER LIGHTS WIT REMOTE. (PART AND LABOR)

    32. RCA BOARD REPLACEMENT (PART/LABOR) - $25.00
    (THIS CONSISTS OF DESOLDERING AND RE-SOLDERING THE CIRCUIT BOARD)

    33. CUSTOM POWDER COATING CANDY OR CHAMELEON COLORS - $200.00
    (THIS CONSISTS OF FULLY DISASSEMBLING OF UNIT, PREPARING FOR PAINT, PROFESSIONAL POWDER COATING)


    This seems like a pretty comprehensive list to me!!!!!!
    Beats By Dre is like audio flu for your balls.

  2. #2
    Tech Mentor
    Join Date
    Aug 2011
    Posts
    201

    Default

    That's my boys site. I highly recommend his work.

  3. #3
    DJTT Scribe Mod smiTTTen's Avatar
    Join Date
    Jan 2011
    Location
    Then: UK. Now: US.
    Posts
    1,938

    Default

    Its highly unlikely that there won't be some $$$ flowing from my bank account to his at some point.
    Beats By Dre is like audio flu for your balls.

  4. #4
    Tech Mentor hayden14's Avatar
    Join Date
    Sep 2010
    Location
    East Bay Area
    Posts
    118

    Default

    Quote Originally Posted by smittten View Post
    Its highly unlikely that there won't be some $$$ flowing from my bank account to his at some point.
    Check out Aycustoms, they have a great facebook page and are around the same area as henray. But you have to email them to get there catalog, Henray does great work but Aycustoms is about 25% cheaper and they do combo deals making things a little more price convenient.

    still too much for me to spend right now
    13" Macbook Unibody 2010 / TSP2 / 2x Technics 1200 M3D / DJM T-1

  5. #5
    Tech Guru
    Join Date
    Nov 2011
    Location
    Northern VA
    Posts
    550

    Default

    It is comprehensive. Pretty standard prices compared to mine. If you need work done Smitten I'm sure between Nicadarus, Xone, and myself we could hook it up.


    djproben - "But who can resist an album called "the Gay 90s"! I assumed it was going to be a lot of Moby and Keoki...."

  6. #6
    Tech Student
    Join Date
    Mar 2012
    Location
    DMV (DC-MD-VA)
    Posts
    2

    Default

    Quote Originally Posted by djlotus View Post
    It is comprehensive. Pretty standard prices compared to mine. If you need work done Smitten I'm sure between Nicadarus, Xone, and myself we could hook it up.
    DJ Lotus

    I'm excited to hear you're in NoVA since your prices are comparable to Henray's. Please check your private messages.

    Thanks.
    @DJYagga

  7. #7
    Tech Guru DjLiquitATL's Avatar
    Join Date
    Aug 2008
    Location
    Chatt-town, TN
    Posts
    885

    Default

    dope site but I've seen multiple ttables he post on ebay with ORANGE PEEL, unless he has started correcting it I wouldn't pay for paint job
    --> (2) silver 1200 mk2, (2) Vestax pdx 2000's, TSP2, RaneSL2, Vestax 05Pro IV REDBEAT, RED Vestax VCI-380, Rokit 5 Monitors, MacBook Pro<--

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •