Audio 10 - Xone 2D
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1

    Default Audio 10 - Xone 2D

    Here I am again, almost figured everything out.

    I need something like the audio 10 to hook up my DDM4000 to traktor, but I don't want to spend 500$ on some damn soundcard.
    I looked on the interwebs and found that the Xone 2D is also a 8channel soundcard.

    If I mix these two together, the DDM4000 hooked up to a Xone 2D, the Xone to traktor, would that do the same as an audio 10?

    Thanks in advance, you guys have already been a huge help for this noobie.

    WY
    Latest Production: https://soundcloud.com/pjetrovmusic/techhouse-project-1
    - F1 - F1 - CME UF6 - Maschine Mikro -

  2. #2
    Tech Guru MyUsername's Avatar
    Join Date
    Nov 2011
    Location
    Belgium
    Posts
    1,139

    Default

    Xone 2D is NOT scratch certified.
    So no timecode with that.

  3. #3
    Tech Mentor seitz's Avatar
    Join Date
    Dec 2010
    Posts
    430

    Default

    why would a digital mixer not have usb x.x



    get something like http://www.amazon.com/M-Audio-Midisp...1759883&sr=1-2 and just hook it up to your laptop?


    edit: you still need a soundcard....u could always get an audio 2 and run usb from your computer into the audio 2 into channels a/b on your mixer and use the above midi to usb to allow you to control traktor
    Last edited by seitz; 07-08-2012 at 10:09 AM.

  4. #4
    Tech Guru MrPopinjay's Avatar
    Join Date
    May 2010
    Location
    London, UK
    Posts
    3,747

    Default

    2 x NI Audio 2
    Then aggregate them into one soundcard using ASIO4ALL drivers on Windows or just core audio on a Mac. Viola- 4 stereo outputs!

    Other options include a second hand Audio 8 DJ (warning, may not work with USB 3.0) and the ESI Gigaport.

    There's really not enough options for those wanting 4 stereo outputs, it sucks hard
    The xwax Thread! - The minimal open source DVS for Linux!
    Reddit's /r/DJs! - Another great DJ community!

  5. #5

    Default

    Quote Originally Posted by MyUsername View Post
    Xone 2D is NOT scratch certified.
    So no timecode with that.
    I don't really mind timecode, I just want a soundcard that works with traktor
    Latest Production: https://soundcloud.com/pjetrovmusic/techhouse-project-1
    - F1 - F1 - CME UF6 - Maschine Mikro -

  6. #6

    Default

    xone 2d and DDM4000 will work just fine, I've used that setup before.

    You can mix externally on all 4 channels.

    You can also use either a usb to midi cable to use the midi functions of the DDM4000 or use a straight 5 pin midi cable routed through the 2d's midi in/out, so you only need to use up one usb port.
    www.djmoonie.co.uk
    The Left for dead show
    (GMT+0) Tuesdays Midnight til 1.30am, on www.phonic.fm,
    or 106.8fm in the south west of england.
    For private bookings, please use www.djmoonie.com

  7. #7

    Default

    Quote Originally Posted by djmoonie View Post
    xone 2d and DDM4000 will work just fine, I've used that setup before.

    You can mix externally on all 4 channels.

    You can also use either a usb to midi cable to use the midi functions of the DDM4000 or use a straight 5 pin midi cable routed through the 2d's midi in/out, so you only need to use up one usb port.
    In that case the DDM4000 is just a midi controller and I can only prelisten with the Xone 2D?
    Latest Production: https://soundcloud.com/pjetrovmusic/techhouse-project-1
    - F1 - F1 - CME UF6 - Maschine Mikro -

  8. #8
    Tech Guru Cook's Avatar
    Join Date
    Jul 2010
    Location
    Glasgow, Scotland
    Posts
    1,622

    Default

    Quote Originally Posted by WastedYouth View Post
    In that case the DDM4000 is just a midi controller and I can only prelisten with the Xone 2D?
    run the RCAs from the 2D into your ddm4k, then you have 'pre-listen'

    If your wanting to use the midi on your ddm as well as the 2D, run a midi cable out the ddm into the 2d, then connect the 2D to your laptop via usb.
    DJM800 | 2xCDJ2000 | RMX1000 | Adidas HD25's
    2011 MBP | Traktor 2.6 | Kontrol S4 | Scratch Live | SL2
    Mac Pro | Ableton | Access Virus C | Maschine
    Facebook || Soundcloud || Twitter

  9. #9
    Tech Guru Cook's Avatar
    Join Date
    Jul 2010
    Location
    Glasgow, Scotland
    Posts
    1,622

    Default

    Quote Originally Posted by MrPopinjay View Post
    2 x NI Audio 2
    Then aggregate them into one soundcard using ASIO4ALL drivers on Windows or just core audio on a Mac. Viola- 4 stereo outputs!
    i never ever thought of that, going by the price of used kit, doing this way costs half of that of a audio 8DJ.
    DJM800 | 2xCDJ2000 | RMX1000 | Adidas HD25's
    2011 MBP | Traktor 2.6 | Kontrol S4 | Scratch Live | SL2
    Mac Pro | Ableton | Access Virus C | Maschine
    Facebook || Soundcloud || Twitter

  10. #10

    Default

    Quote Originally Posted by Hoodless View Post
    run the RCAs from the 2D into your ddm4k, then you have 'pre-listen'

    If your wanting to use the midi on your ddm as well as the 2D, run a midi cable out the ddm into the 2d, then connect the 2D to your laptop via usb.
    Big big thanks man.
    Latest Production: https://soundcloud.com/pjetrovmusic/techhouse-project-1
    - F1 - F1 - CME UF6 - Maschine Mikro -

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •