Do You Want to Beta Test?
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Mr. Golden EanGolden's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    970

    Default Do You Want to Beta Test?

    Do you have:
    1. vci-100 firmware 1.2
    2. a little bit of spare time
    3. interest in trying out all the features of the vci-100 special edition

    Then you qualify!

    So message me here on the forum and I will get you on the beta list for mini.Translator and the new vci-100se preset. You need to be a forum member so I can give you permission to access the folder.
    Last edited by EanGolden; 07-13-2008 at 10:01 PM.

  2. #2
    Tech Wizard shedg's Avatar
    Join Date
    Jun 2008
    Location
    Cairns, Australia
    Posts
    43

    Default

    I fit the job description and yes I am keen to give it a go.

  3. #3
    Tech Mentor
    Join Date
    May 2008
    Location
    Bolgare (BG), Italy
    Posts
    113

    Default

    It would be great to be your beta tester! But my VCI's firmware is 1.1...
    Last edited by fcarsana; 07-14-2008 at 07:04 AM.

  4. #4
    Schreiberie Meister Afterhour Ali's Avatar
    Join Date
    Jun 2008
    Location
    Tekki's crotch
    Posts
    1,568

    Default

    ewww...sorry for the noob question, but how can I check my VCI-100 firmware?
    Let me guess. The ordinary one comes only with 1.0 :/

  5. #5
    Dr. Bento BentoSan's Avatar
    Join Date
    Mar 2008
    Location
    Perth, Australia
    Posts
    6,356

    Default

    I don't think 1.0 was ever released to the public ? - i could be wrong
    There is 1.1 that has jog problems - i believe this to be the original release
    1.2 fixed jog problem. - Vestax started shipping units with a new firmware and a 1.2 sticker on the box
    1.3 Ean Golden Special Edition. - do i need explain

    If you need to test to see if you have the 1.2 firmware this is from the update release info.

    "Jog wheel Cancel Mode
    Due to sounds at clubs and large venues, when using
    the YCI-100 near heavy bass, the vibration can offset
    the jog wheel and the pitch may change.To continue
    your mix in severe conditions, we have updated the
    YCI-100 with this new feature.
    When PGM1 and PGM2 "vinyl" (jogseek) switch are
    pushed at the same time, the function of Jog is
    canceled and the JOG's LED is turned off. The update
    will assist your DJ play by turning the platter functions
    off, 'therefore if the jog sensor/platter is touched or
    shifts by accident your DJ playing will not be affected."

    This will only work in with the 1.2 firmware and not the 1.1 firmware.

  6. #6
    Tech Mentor
    Join Date
    Mar 2008
    Location
    Nashville, TN
    Posts
    148

    Default

    yes pls i fit the bill... and i like to test new stuff...

    new kid on the block with the latest nike's was always my dream

  7. #7
    Schreiberie Meister Afterhour Ali's Avatar
    Join Date
    Jun 2008
    Location
    Tekki's crotch
    Posts
    1,568

    Default

    "Jog wheel Cancel Mode
    Due to sounds at clubs and large venues, when using
    the YCI-100 near heavy bass, the vibration can offset
    the jog wheel and the pitch may change.To continue
    your mix in severe conditions, we have updated the
    YCI-100 with this new feature.
    When PGM1 and PGM2 "vinyl" (jogseek) switch are
    pushed at the same time, the function of Jog is
    canceled and the JOG's LED is turned off. The update
    will assist your DJ play by turning the platter functions
    off, 'therefore if the jog sensor/platter is touched or
    shifts by accident your DJ playing will not be affected."
    If I got that right, if both jogs are pressed the blue LEDs should be on and not the red ones. If thats correct I have 1.0 and can't test anything ...eww

  8. #8
    Retired DJTT Moderator DvlsAdvct's Avatar
    Join Date
    Mar 2008
    Location
    New Jersey/NYC
    Posts
    4,826

    Default

    ALim, if you press both Vinyl Mode buttons it should turn off the LEDs off the jog wheels. That's firmware 1.2
    It's the FAQ. Read it.

    My Mixes, Mashups and Rants

    Divided we stand
    United we fall

  9. #9
    Schreiberie Meister Afterhour Ali's Avatar
    Join Date
    Jun 2008
    Location
    Tekki's crotch
    Posts
    1,568

    Default

    Oh!
    It turns both LEDs off if I press both buttons so I have firmware 1.2.

    Sorry, wasn't sure about the jogseek thing.

    EDIT: PM'ed ean to ask for access to that folder
    Last edited by Afterhour Ali; 07-14-2008 at 09:55 AM.

  10. #10
    Tech Wizard
    Join Date
    May 2008
    Posts
    75

    Default i want to be a beta tester

    yes, dude count me in, i want to...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •