VCI-100 1.3 Firmware UPGRADE!
Results 1 to 4 of 4
  1. #1

    Default VCI-100 1.3 Firmware UPGRADE!

    Yeah so i just received my firmware kit along with my traktor pro outlay

    I did everything on the video, and everything went fine, i used a serial to serial cable, and the flash development 4.02 said that it was successful, so i clicked disconnect exit, and then unplug the firmware kit.

    After putting the vci-100 altogether, i test it and it still appears to be firmware 1.2. The two jog wheels turn off when i press both vinyl buttons. And when i do the 1.3 firmware test it doesnt work. Clicking the snap button twice doesnt toggle the light.

    Now I cant even get the MIDI setup to work in Traktor...
    Traktor Pro can detect my VCI-100 PC controller [emulated] but when i click buttons on the controller the MIDI signal light next to the Audio signal doesnt light up....i dont know why Traktor Pro isnt picking up my VCI's midi signals anymore...BOMES MIDI Translator on the other hand can pick it up....weird..

    Please help, i need my VCI to be working by Saturday, with 1.2 or 1.3

    your help will be greatly appreciated.
    If i cant figure this out by wednesday is anyone in the san fernando valley/Los Angeles area, willing to help me. I really need to fix this so i can DJ for my sister's 18th birthday party on saturday
    Last edited by mcbusta348; 07-14-2009 at 03:47 AM.

  2. #2

    Default

    This is what it says after I clicked program flash:



    Flash Development Toolkit and flash programming components
    are provided without support

    OS: Windows XP [Admin]
    FDT API initialised: version 4, 02, 00, 008
    Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
    Connecting to device 'H8/3052F' on 'COM1'
    Configuration:
    'BOOT Mode' connection - using emulated interface
    Opening port 'COM1' ...
    Loading Comms DLL
    Loaded Comms DLL
    Initiating BOOT SCI sequence
    Attempting 9600
    Received immediate response from device: 0xAA
    Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde'
    Downloading and verifying micro kernel...
    Device is erasing...
    Erase Timeout value set to 21 seconds
    Erase Successful
    micro-Kernel download successful
    Sending inquiry for getting line size
    Buffer size has been set to default (128 bytes)
    Sending selection of device command
    Selection of Device - Device selected, code 0302
    Sending selection of clock mode
    Sending selection of clock mode
    Selection of Clock Mode - Clock selected, code 0
    Changing baud rate to 38400 bps
    Set baud rate value = 38400
    Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde'
    Main kernel download complete...
    Connection complete
    Processing file :"C:\Documents and Settings\Marlon\My Documents\Downloads\vci-100se_13_firmware(2)\VCI-100SE_1.3_Firmware.mot"
    Operation on User Flash
    Downloaded the operation module
    Writing image to device... [0x00000000 - 0x000000FF]
    Writing image to device... [0x00000200 - 0x0000647F]
    Writing image to device... [0x00008000 - 0x0000807F]
    Writing image to device... [0x00009000 - 0x0000907F]
    Writing image to device... [0x00009080 - 0x0000917F]
    Writing image to device... [0x00009180 - 0x00009AFF]
    Data programmed at the following positions:
    0x00000000 - 0x000000FF Length : 0x00000100
    0x00000200 - 0x0000647F Length : 0x00006280
    0x00008000 - 0x0000807F Length : 0x00000080
    0x00009000 - 0x0000907F Length : 0x00000080
    0x00009080 - 0x0000917F Length : 0x00000100
    0x00009180 - 0x00009AFF Length : 0x00000980
    27.75 K programmed in 13 seconds
    Image successfully written to device

  3. #3

    Default

    I found out what was wrong. For some reason Traktor Pro, didn't pick up my signals because my sound card wasn't in. I dont know why I had to plug in my sound card in order for Traktor Pro to detect the VCI signals, but it works now

    For people who have the same problem "Updating successfully and not being able to run it Traktor, try testing it with your sound card hooked up. I have a Numark DJ|IO.


    Ty DJ TechTools

    I sent an email to info@djtechtools regarding my problem earlier, but disregard that now

  4. #4
    Dr. Bento BentoSan's Avatar
    Join Date
    Mar 2008
    Location
    Perth, Australia
    Posts
    6,383

    Default

    Glad to hear you got this sorted I was just about to lend you a hand

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •