Results 1 to 5 of 5
  1. #1

    Default Help with a soundcard

    Hi guys,

    So, I have 2x 1210s and a Numark M6 mixer which has 4 channels. Now I want to go down the DVS route and get an X1. Can I use a Traktor Audio 6 to control the turntables for deck A and B and use the X1 to control deck C and D? Or do I need the Traktor Audio 10 instead of the Audio 6?

    I hope that's clear enough to understand, any help is appreciated

  2. #2
    Tech Mentor jayo's Avatar
    Join Date
    Oct 2010
    Location
    Toronto
    Posts
    348

    Default

    A6 will work just fine, this is pretty much my exact setup,
    A&H Xone 42, 2 x X1's, A6, Sony MDR V-700's
    http://soundcloud.com/louischancellor

  3. #3
    Tech Mentor jayo's Avatar
    Join Date
    Oct 2010
    Location
    Toronto
    Posts
    348

    Default

    But you will have to route c and d to a single channel. If you want them to have their own channel you need the A10. I use a second x1 to control sample decks, so using the filters I'm okay having c and d on the same channel.
    A&H Xone 42, 2 x X1's, A6, Sony MDR V-700's
    http://soundcloud.com/louischancellor

  4. #4
    Tech Guru papo's Avatar
    Join Date
    Feb 2011
    Location
    Miami, Fl
    Posts
    555

    Default

    If you want to have separate volume controls on your mixer for decks C & D, then you will need an Audio8/10.

    If you don't mind having both C and D coming out through the third channel on your mixer (only one fader for both decks), then the Audio6 will be just fine.

  5. #5

    Default

    Ahh ok I understand, thanks for the help!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •