Results 1 to 3 of 3
  1. #1
    Tech Mentor Mavis Concave's Avatar
    Join Date
    Jun 2011
    Location
    Cincinnati, Ohio, USA
    Posts
    111

    Default Need help with installing Bourns faders... Having trouble reading schematics... Pins?

    The final step of my Midifighter Classic mod is soldering in the (4) Bourns faders (PTE60-151B-103B2).

    Here is the product page:
    http://www.newark.com/bourns/pte60-1...ide/dp/17M1567

    Here is the data sheet (with schematics on the first page):
    http://www.farnell.com/datasheets/759287.pdf

    - The fader has 3 pins on it, labeled 1,2, and 3.
    - Pins 1 and 2 are next to each other on one end. Pin 3 is alone on the other end.
    - I am using the single gang version.
    - I don't have a multimeter and am not very good at figuring out schematics. First time wiring up faders!

    I need your help figuring out which pin to wire to the +5V, the Ground, and the Analog terminals on my Midifighter Classic PCB.

    Here is a pic of the schematic for quick reference.
    Attached Images Attached Images

  2. #2
    DJTT Infectious Moderator photojojo's Avatar
    Join Date
    Apr 2010
    Location
    Sherman, TX
    Posts
    14,086

    Default

    I won't be much help here, but I can offer this.

    http://www.radioshack.com/product/in...EAAA&gclsrc=ds

    If I had to guess I would say 2 is ground. Maybe someone smarter than me will pop in here.

  3. #3
    Tech Mentor Mavis Concave's Avatar
    Join Date
    Jun 2011
    Location
    Cincinnati, Ohio, USA
    Posts
    111

    Default

    I figured it out! MF Classic mod is complete. Photos and videos posted soon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •