Jester's Mighty X1 MkIII (2 Deck, FX & Mixer Modes, Preparation)
Results 1 to 9 of 9
  1. #1
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Wink Jester's Mighty X1 MkIII (2 Deck, FX & Mixer Modes, Preparation)

    Hey folks, here is the latest version of my X1 Mapping, designed for those who wish to use the X1 as a mixer. Video is uploading.

    Notes:
    - 2 Modes, FX (Standard) & EQ (Mixer)
    - Crossfader can be used in any mode
    - Preparation functions
    - General tweaks

    [FX ON]
    - Toggles FX/EQ Modes
    - Switching to EQ Mode engages filter, FX Mode disengages filter
    - SHIFT + [FX ON] resets Gain & Filter

    [DRY/WET]
    - FX Mode: [DRY/WET] for FX Unit 1
    - EQ Mode: Filter Adjust SHIFT + [DRY/WET] Gain Adjust

    [1-3]
    FX Mode - Effects activate 1-3 SHIFT + [1-3] cycles the available effects.
    EQ Mode - EQ Kill Low, Mid, High (also mid low/high if you use the Xone eq)
    SHIFT + [1-3] in EQ Mode activates Effects 1-3 just as if you were in FX Mode
    Removed FX Unit 1&2 Kill when swapping modes, due to "customer feedback"

    - Right [BROWSE] is normal playlist scrolling
    - Left [BROWSE] switches to browser mode as well as normal scrolling
    - Loading either deck switches back to deck view
    - SHIFT + [LOAD] toggles between Deck/Browser views
    - SHIFT + [BROWSE] scrubs through the track
    - In EQ Mode, [FX1] & [FX2] are volume controls, with some led feedback (Full volume bright, low volume dim)

    Crossfader:
    - Works in any mode
    - SHIFT + Left [FX1] & Right [FX2] activates the Crossfader
    - SHIFT + Left [FX1] & Right [FX1] activates the Auto XF

    SHIFT + Left [LOOP SIZE]
    - Beatjump on focus deck (+/- 32)

    SHIFT + Right [LOOP SIZE]
    - Deck Zoom In/Out

    SHIFT + Left [IN/OUT]
    - Move Grid

    SHIFT + Left [TEMPO BEND +/-]
    - Adjust Analyzed BPM

    SHIFT + [Sync]
    - Drop Grid Marker

    SHIFT + [CUE] + [CUP]
    - Previous/ Next Cue point

    - Also some miscellaneous features mentioned in coming video

    Attached Files Attached Files
    Last edited by Jester; 02-02-2013 at 08:17 PM.
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  2. #2
    Tech Mentor
    Join Date
    Jan 2011
    Location
    Charlotte, NC
    Posts
    290

    Default

    Thank you for making the video and explaining the features.

  3. #3
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Default

    yeah i thought i would be a lot easier than a confusing diagram (plus, i am lazy)
    cheers.
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  4. #4
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Default 3.1 update

    New version 3.1

    ADDED - Switching deck to FX mode now resets filter position
    - Loading deck resets deck zoom to -.75 (default position)
    - Loading deck resets crossfader to centre position
    - Loading deck in Mixer Mode makes deck volume 0 (the idea being if you use the FX mode when you prep tracks, the deck volume stays up making things a bit easier)
    - SHIFT + PLAY toggles BPM lock on/off
    - In the zoomed preparation mode, tempo bend can be used to fine tune the playhead position before
    dropping a grid marker

    Mapping Site updated https://maps.djtechtools.com/mappings/1141
    Last edited by Jester; 02-02-2013 at 09:21 PM.
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  5. #5

    Default

    I am a little bit confused about switching presets. It says to place both FX1 and FX2 (the top buttons) to ON to go into mixing mode. This works but when I turn them off to get out of mixing mode, the FXs turn off. Is there a way to switch with a shift button so that I can still keep FXs on in either FX or mixing mode?

  6. #6
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Default

    Hi there,
    the modes are independent for each deck so you could have deck a in mixer mode and deck b in fx mode, for example.
    the fx units remain on when switching between modes if you have them set, and you can still activate the effects by holding shift+1-3 kill.
    what traktor version are you on? i haven't been able to replicate your problem, this mapping was made in tsp 2.5.1, if you are using 2.6+ there have been more changes to the way mappings work which i haven't tested.
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  7. #7
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Default MK IV Unleashed

    Updated + Tweaked For TP 2.6.4

    Changes in Mk IV

    - Changed LOOP SET To (HOLD)
    - Removed Loop Active LED Feedback
    - Added Post Fader VU Meters To Transport Section
    - Removed BPM LOCK Command From "SHIFT+PLAY" + Replaced With A JUMP TO TRACK START Command
    - Removed Clashing Filter Commands
    - Changed GAIN ADJUST Command To L/R DRY/WET In EQ Mode
    - Added Automatic Cue Panel Selector When Loading Track
    - Removed BEATJUMP Command From "SHIFT+LEFT SIZE" + Replaced With A FAVORITES SELECTOR Command
    - Changed ONLY BROWSER TOGGLE to "RIGHT BROWSE" Only
    - Removed SELECT UP/DOWN BROWSER Command From "LEFT BROWSE" + Replaced With TREE SELECT UP/DOWN
    - Added LIST EXPAND/COLLAPSE Command To "SHIFT+LEFT LOAD"
    - Removed VOLUME RESET Command When Loading A Track In Internal Mode

    https://maps.djtechtools.com/mappings/1141
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  8. #8
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Noiseeland
    Posts
    12,426

    Default

    ADDED IN VERSION 4.0.2


    - Added DECK VOLUME Reset Command to SHIFT+Left FX1/RIGHT FX1 (EQ Mode)
    - Tweaked Post fader VU Meter Sensitivity
    - Removed Pointless Beat Phase Monitor
    Acer E5 i7 16GB 512SSD 2TBHD ~ WIN 10 ~ TSP 2.11 ~ AUDIO 6 ~ DUAL X1s ~ DN-X1600 ~ SPECTRA ~ TWISTER ~ ATH-PRO500 MK2 ~ ZED6FX ~ AT2020

    " I’m the Dude, so that’s what you call me. That or, uh His Dudeness, or uh Duder, or El Duderino, if you’re not into the whole brevity thing. "

  9. #9
    Newbie
    Join Date
    Oct 2013
    Posts
    1

    Default

    Awesome stuff, you're making my life so easy.

    One thing that may not be troubleshootable: when you switch to FX mode it cuts the fillter but also disables shift+dry wet for Gain. When you turn EQ mode on it enables the filter and the second you touch the dry-wet it'll move the filter knob to the point of the gain you have set. So if you run with the Gain on +5 or what not then your filter is going to kick in.

    I know it's probably not possible, or if it is to map it to another, but is it possible to smoothe out how those two FX ons work so that you can always control them to their full extent? I have no problem manually moving the gain to what it should be set as but if I have the filter off I can't move the gain at all.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •