Why can't I get the remix deck to fire from Midi Fighter 3D
Results 1 to 2 of 2
  1. #1
    Tech Convert Kyoh's Avatar
    Join Date
    Feb 2013
    Location
    Springfield, IL
    Posts
    17

    Default Why can't I get the remix deck to fire from Midi Fighter 3D

    I have tried Ean G's remix deck mapping and I can't get anything to trigger.

    I understand how to modify all the sounds, but I can't get them to trigger with the buttons on the midi fighter 3d.
    I realize that you must hit the middle button on the right hand side to activate it vs the effects settings, and it doesn't work.

    My pan/tilt features seems to be working.

    I have tried to open a remix deck in each deck to verify that I didn't just not have it selected?

    Can Anyone provide the options needed to map this myself?

    Traktor 2.6.0 - Mac
    Inspired by DJ Tech Tools

  2. #2
    Tech Convert Kyoh's Avatar
    Join Date
    Feb 2013
    Location
    Springfield, IL
    Posts
    17

    Default

    Ok so here's the beef... I'm kinda tschie so I tried this many Many MAny MANy MANY ways...... and finally got Ean G's "jam on it" to import into Traktor 2.60

    There's a fe things you have to think about here...
    1.) actually getting the import to work and have it control all 3 area's of functionality
    A.) Remix Deck Control B.) FX Control with buttons C.) FX control with accelerometer

    Once this is complete you have to (little) import your controller settings. (mine is a Numark Mixtrack Pro)

    So I had to bounce around a bunch to get things to work. So here's the steps I used to do this.
    (little import is found at the top) (big import is found at the bottom)

    1.) Delete ALL controller settings from Controller manager
    2.) run the wizard for your controller. (Mine was a Numark Mixtrack Pro)
    3.) Check all your mappings and functionality on the controller and adjust as necessary.
    (this is where I need to re-map my 3 hot cue buttons at the top)
    4.) Export your controller settings.

    5.) Delete all controller settings from the Controller Manager.
    6.) Import "Ean G's Jam on It" using the big import button
    7.) Import "Ean G's Jam on It" using the Little import button
    8.) Import "Ean G's Jam on It" using the Little import button
    9.) Import your saved controller setting using the little import button

    Voilla! NOW TEST!

    Test your controller settings, Hot cue's, Midi Fighter 3D settings.

    10.) EXPORT! This is now your Master import in case anything happens. I recommend saving this in 3 seperate locations.
    1.) Documents 2.)External media Harddrive 3.)External small thumb drive (disaster recovery)
    Inspired by DJ Tech Tools

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •