Help With S4 Audio Set Up.
Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Apr 2013
    Posts
    4

    Default Help With S4 Audio Set Up.

    I was running the S4 with a Pyle Pro Hybrid amp through the CD/DVD input before someone spilled all over it! So I got a new set up but Im getting nothing to the Amp, amp powers on, S4 powers and is responsive with the labtop, but Zero sound from speakers and the LEDs on the amp don't move. This is what I'm running

    S4 to Technical Pro LZ6200 with RCA's from S4 main out to input on amp
    LZ6200 to 2 Gem Sound Tr100-1 through banana clips....i got a sub and some bigger speakers on the way but wanna start playing ASAP.

    Here are the specs on the amp and speakers.
    LZ6200
    6200 watts peak power
    1500 watts @ 2 ohms
    900 watts @ 4 ohms
    500 watts @ 8 ohms
    Inputs: Balanced XLR, 1/4'', RCA
    Outputs: Speakon, Banana binding post
    Dual cooling speed fans
    Iridescent blue LED meter
    Clipping indicator per channel
    Bridge / stereo selector
    Built-in key lock (cuts audio output to prevent tampering)
    Dimensions: 19''w x 3.5''h x 11.5''d
    Weight: 21 lbs
    Voltage: 110-220V Switchable

    Again i got nothing here. Any help would be greatly appreciated. Thanks

  2. #2
    Tech Guru
    Join Date
    Mar 2012
    Location
    York, UK
    Posts
    3,428

    Default

    Have you tried using the TRS outputs of the S4? Does the amp work with any other audio source?

    And do the RCA outputs of the S4 work on other speakers?
    VCM100 / X1 / DJM250 / DJM900 / CDJ2000s / Maschine / Audio2+4 / 2i4 / HS8s / TSP 2.6.8
    Macbook Air i7-3667U+8GB 10.9 / Win7x64 i5-3570k+24GB


  3. #3
    Newbie
    Join Date
    Apr 2013
    Posts
    4

    Default

    Here is the speaker speaks
    350 watts
    10" woofer with high tempered voice coil
    Piezo driven horn
    bullet super tweeter
    Carpet finish
    Steel corners & Heavy duty handles
    Inputs: Dual 1/4" and binding post
    8 ohms
    23 lbs
    21" x 16" x 13"

    The speakers work with a amp I tested at radio shack. They are passive and work when I plug them into the 1/4 inch inputs but they don't get loud of course. So I'm going to try the 1/4 inch main out to the main input on the amp and hope that works. It's like I'm getting no signal to the amp from the s4.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •