-
Loop Size Selector Output broken?
I'm trying to map the loop size output on my x1 mk2 in midi mode so that the display at least shows loop sizes 1 through 32 (I have no clue how to get the 1/ loops displayed). But it just seems broken. Only two sizes (4 and 32) show consistently. 1 and 2 only show when going up in size, 8 only shows when going down and 16 only flashes for a short time when going up. In all other cases these sizes just show 0.
Every size is mapped in the same way. For loop size 4: Loop size selector, out, deck c, controller range 7:7, midi range 0:4
I've also tried controller ranges that overlap (from 6:7 to 7:8 for example) or used loop size select+set, but nothing works. It makes no sense whatsoever.
Can anybody shed some light on this?
-
DJTT Mapping Ninja Moderator
One beat loop should be 5-5 in the controller range.
-
I know, look at the example I gave.
-
DJTT Mapping Ninja Moderator
And monitor state? Seems that controller output couldn't properly refresh the LED state.
-
DJTT Mapping Ninja Moderator
Just tested with my midifighter - no issues with this command in 2.6.8
-
Nope, in fact now it's even more fubar xD
-
DJTT Mapping Ninja Moderator
If your mappings are correct then this sounds like a job for NI support desk...
-
Done. By the way, it's different from sending led outputs to different leds. I've done that on my DDJ-SR in exactly the same way I described above and that works indeed perfectly.
-
I think I have a possible solution, if you have two free modifiers. One of stewe posts helped me come up with this. I'll post the tsi in a second, to complex to explain but I made it specificaly for the function you mentioned.
-
That would be great! NI was not really helpful at all, they simply told me to start over with the mapping.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks