Behringer MM1 $ Traktor headphone cueing level?
Results 1 to 4 of 4
  1. #1
    Newbie
    Join Date
    Jul 2014
    Posts
    3

    Default Behringer MM1 $ Traktor headphone cueing level?

    Hello all, this is my first post so please go easy on me..

    I'm trying to set up a Behringer MM1 with Traktor and everything is almost there.

    The only thing I can't do is the monitor the volume of the different channels for cueing up the next track. i.e. setting the gains before you mix in the track (eg as you do on a hardware DJM etc). I was told by Behringer the following, but can't work out how do it with Traktor. Any suggestions?

    Advice from Behringer :
    The MM-1 acts exactly like a regular DJ mixer once everything has been mapped. You will need to MIDI map the CUE buttons to SOLO each channel individually. Once the CUE buttons are then activated on the MM-1 you will have that channel's corresponding volume level displayed in the VU meter. With all CUE buttons in the OFF position the main mix is shown in the VU.

  2. #2
    Tech Guru
    Join Date
    Mar 2008
    Location
    Seattle, WA
    Posts
    1,471

    Default

    The Traktor mapping for the MM-1 is already set up to control the CUE selection, CUE MIX, and CUE LEVEL functions - so you shouldn't need to do anything to get them to work.

    What audio interface are you using?

  3. #3
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Quote Originally Posted by mikrowave View Post
    Hello all, this is my first post so please go easy on me..

    I'm trying to set up a Behringer MM1 with Traktor and everything is almost there.

    The only thing I can't do is the monitor the volume of the different channels for cueing up the next track. i.e. setting the gains before you mix in the track (eg as you do on a hardware DJM etc). I was told by Behringer the following, but can't work out how do it with Traktor. Any suggestions?

    Advice from Behringer :
    The MM-1 acts exactly like a regular DJ mixer once everything has been mapped. You will need to MIDI map the CUE buttons to SOLO each channel individually. Once the CUE buttons are then activated on the MM-1 you will have that channel's corresponding volume level displayed in the VU meter. With all CUE buttons in the OFF position the main mix is shown in the VU.
    Welcome microwave,

    If you're still around I think I'd be able to create what Behringer suggests you to do. I still have my MM1 and use it every day

  4. #4
    Newbie
    Join Date
    Jul 2014
    Posts
    3

    Default

    Quote Originally Posted by Stewe View Post
    Welcome microwave,

    If you're still around I think I'd be able to create what Behringer suggests you to do. I still have my MM1 and use it every day
    Hey Stewe thanks for your response. I already managed to get it working via the NI forum and a few Traktor tutorials. Involved setting up some toggle modifiers, all seems to work so happy days

    But thanks again, I think I also installed one of your mappings in the hope it might have done the above!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •