Alto TS15a Sub vs. Behringer b1500d sub
Results 1 to 3 of 3
  1. #1
    Tech Mentor
    Join Date
    Mar 2011

    Default Alto TS15a Sub vs. Behringer b1500d sub

    Hey guys if you have owned either sub can you give me a bit of your take on it? both seem to have decent reviews I know behringer has a bit more low end for about 50$ more but there's also that stigma attatched but i've heard their eurolive series is one of the best!

    Behringer b1500d ($640)
    • 1400W Class-D amplifier with comprehensive over-excursion, thermal, and clip limit protection
    • 15'' long-excursion transducer with high-temperature voice coil provides accurate, pulse-pounding bass
    • 126dB half space 1W @ 1m
    • Precise reproduction of ultra-low frequencies 35-150Hz
    • Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
    • Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
    • Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
    • Power, Signal, and Clip LEDs for perfect monitoring
    • Intelligent limiter for maximum sound performance and woofer protection
    • Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
    • weight 92.6lb./42kg

    Alto Ts15a (600$)
    • Powered System: Continuous-600 Watts, Peak-1200 Watts
    • Frequency Response (-10dB): 42 Hz-12 5Hz under analogue processor
    • Maximum SPL @ 1m: 123 dB continuous / 126 dB Peak
    • Transducer Low: 15 inch woofer, 3 inch copper sandwich voice coil, with long excursion
    • Active Crossover: Band pass type 12 dB / oct. under analogue processor
    • Input Connectors: In-Left / Mono (Combo) Right (XLR-F) / Out-Left /Mono-Right (XLR - M) / Link-Left / Mono-Right (XLR-M) Balanced (15 kOhm)
    • Input: Level L-R Input Line at 0dBu
    • Crossover Frequency: L - R output with high pass filter at 80Hz or flat for L-R satellite
    • External Controls: Volume control / Phase switch / HPF - 80 Hz bypass / Power-on with green LED / Clip limiter with red LED / Ground lift
    • Enclosure: 18 mm plywood cabinet, glued and reinforced, resistant black paint, metal grille, rubber feet
    • Weight: 27.04 kg / 59.49 lbs.
    Last edited by smoez; 07-16-2014 at 02:12 PM.

  2. #2
    Tech Mentor
    Join Date
    Mar 2011


    100 views no reply? bump

  3. #3
    Tech Mentor
    Join Date
    Mar 2011


    help pls anyone looking for input

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts