Results 1 to 9 of 9
  1. #1
    Tech Convert
    Join Date
    Dec 2013
    Posts
    16

    Cool Gannett's Portable Setup (Cramming multiple controllers into one case)

    I mostly lurk at DJTT, but thought it was time to show my setup! I've been evolving a multi-controller setup since I started out 8 months ago. Primarily a hobbyist, but starting to do enough friends' parties, random gigs, and things that moving my setup was becoming a huge hassle. I decided to set out to put all of my controllers into a single case for easy portability.

    I started with a 24" ATA pedal board case:



    (That's a 15" laptop briefcase for scale. Case is probably a little too large to flight carry-on, but it's ATA certified so should be fine as check-in).


    Gear in packed position:



    The top piece of the case comes off completely--I cut grooves into the eggshell foam to fit my keyboard stand arms. The bottom case has rubber feet already attached. The case is wider than club mixers, so for a DJ booth scenario ideally it could sit above the mixer (if the CDJs/turntables have decksavers or something on hand). Worst-case scenario everything is velcro-ed in place and can be removed.


    Gear connected to laptop:



    Hardware (left to right):

    - Native Instruments X1 mk2
    - RME Babyface
    - Midi Fighter Twister
    - Midi Fighter 3D
    - Behringer CMD MM-1
    - BlinkyTape (on back of case)

    The RME has XLR outputs for main, so packed in there are XLR to RCA, XLR to 1/4" TRS, and various adapters to go from there.

    On keyboard stand:



    The BlinkyTape runs a few different visualizers with controls mapped to the MM-1.

    Laptop view:



    Software setup:

    Traktor:
    - External routing, all outputs sent to Ableton
    - Doubled decks for EQ isolation inside of Traktor
    - MF3D controls Traktor effects with this Instagrat-style mapping

    Ableton
    - Handles cueing/final mixing
    - MF Twister mapped to various post-Traktor effects (mostly washes and other effects to mix between tracks)
    - Some effects are on isolated EQ, some on full track, some on full mix
    - Max patches to help with Traktor EQ isolation stuff

    Processing
    - Controls BlinkyTape visualizations

    Audition
    - Records mix (main output on Babyface set to loopback)

    Wish list:

    - Scrolling LED sign to display current track name. It's possible to extract this via Traktor's broadcasting feature. Here's a metadata listener that does it without needing to run a full Shoutcast/Icecast server locally. There are cheap LED name badges that could do the trick. Larger signs are $100+ expensive (even on eBay and places).

    - Super-small MIDI/LED controllers to fit into the dead space for extra indicator lights (right now my deck/Ableton sync lights are on the Twister). I have a VMeter on the way, but seems like the only other option for small stuff is DIY Arduino stuff.

    - A better control surface to replace the MM-1. The built-in hub is nice, but build quality is weak and very little lights up for dark spaces. There aren't many MIDI controllers with crossfaders out there!

    - Stickers for case! I guess I should come up with an actual logo eventually...

  2. #2
    Tech Wizard
    Join Date
    Aug 2013
    Posts
    89

    Default

    Nice! What mappings do you use with MM-1/X1? Especially MM-1, does it control Traktor or Ableton?
    CMD MM-1 - CMD PL-1 - Traktor Kontrol X1 Mk2 - Traktor Kontrol F1 - NI Komplete Audio 6/Traktor Audio 2 Mk2
    My setup history
    Mixcloud page

  3. #3
    Tech Convert
    Join Date
    Dec 2013
    Posts
    16

    Default

    Quote Originally Posted by Ozei View Post
    Nice! What mappings do you use with MM-1/X1? Especially MM-1, does it control Traktor or Ableton?
    The X1 is stock mapping on the bottom half. The FX section has been remapped: Buttons control Traktor EQ isolation (reset/high/mid/low), and the encoders control various things (Traktor zoom levels and then FX dry/wet by bank).

    MM-1 controls a little bit of everything: I keep EQ and filter in Traktor, so knobs map to that, but Ableton handles faders, crossfaders, and cueing. Since EQ isolation doubles my decks the middle two channels are free. Some of those controls are mapped to the BlinkyTape setup, and a few are actually unused at the moment. I'll slowly map them to annoyances or whatever as I use it more. (I just replaced a Z1 with the MM-1 when I added the standalone audio interface).

  4. #4
    DJTT Moderator Dude Jester's Avatar
    Join Date
    Feb 2009
    Location
    Temple Of Boom
    Posts
    11,240

    Default

    Now thats what i call an efficient use of space.
    HP-15" / WIN7 x64 / 128GB SSD / TSP 2.6.8 / AUDITION CC / AUDIO 6 / DN-X1600 / X1 x2 / MIDI-Fighter SPECTRA / ATH-PRO500MK2 / CRANE STAND PRO




  5. #5
    Tech Guru
    Join Date
    May 2009
    Location
    Cincinnati, USA
    Posts
    763

    Default

    Looks like a blast of a setup! I rarely say this in SYS but I would love to see a 10-min mix if you're able! Awesome stuff.

  6. #6
    Tech Mentor
    Join Date
    Mar 2012
    Posts
    136

    Default

    Your setup makes me smile. Very good use of space. Nice colors.

  7. #7
    Tech Guru Patch's Avatar
    Join Date
    Dec 2008
    Location
    Bristol, UK
    Posts
    4,202

    Default

    Performance: 2xTechnics 1200MK2, DJM 850, Dicers, Zomo MC-1000, Sony MDR-v700, Sony VAIO
    Production: Ableton Live 8 and a mouse, MOTU Ultralite, Sennheiser HD400, Sony VAIO

    Click HERE to D/L Free Tracks from Soundcloud!!!
    https://www.facebook.com/Patchdj

  8. #8
    Tech Convert
    Join Date
    Dec 2013
    Posts
    16

    Default

    Quote Originally Posted by ToOntown View Post
    Looks like a blast of a setup! I rarely say this in SYS but I would love to see a 10-min mix if you're able! Awesome stuff.
    I'll record a quick example mix with video when I get a sec! In the meantime, here's a 3-hour mix from a recent lounge gig (first 10 minutes showcases a lot of the glitch/juggle effects well): https://soundcloud.com/gannett/live-...t-redwood-room

  9. #9
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    5,091

    Default

    Nice setup man! I have question about isolation EQ effects: does your mapping only assign EQ kills or you can also apply effects in one go?

    Do you mind to upload that mapping in MAPS?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •