Better late than never
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Tech Convert
    Join Date
    Dec 2008
    Location
    Fishkill, NY
    Posts
    5

    Default Better late than never

    5 1/2 years late I guess... I'm finally setting up my VCI 100 SE arcade edition *hangs head in shame*. I bought it new, and life took a sharp turn for the complicated and it has been in the box in storage since shortly after it arrived. (It even still has a new smell) I always said to myself - you'll have time to get back to it, and that day never seemed to come. FINALLY it did So far a new PC, I have Traktor PRO2 installed (learning all from new), and an audio 2 DJ set upon that machine. Next step I guess will be updating firmware on the VCI, and loading up an appropriate .tsi..... I know I have a shit ton of reading/searching to do now, but just wanted to say hello to all before I begin!

    IE

  2. #2
    Tech Mentor Hi Im Shy's Avatar
    Join Date
    Dec 2014
    Location
    Tallahassee FL
    Posts
    141

    Default

    Welcome back!

  3. #3
    Tech Mentor
    Join Date
    May 2011
    Location
    Mannheim / Germany
    Posts
    299

    Default

    Yeah! Long live the VCI-100!
    MacBookPro 11,1 | i5 2,4GHz | 16 GB RAM | 256 GB SSD
    MacOSX 10.11 | TraktorPro 2.10
    VCI-100 SE FW 1.4 | Traktor Audio2 MK1 FW 2.8.0

  4. #4
    Tech Convert
    Join Date
    Dec 2008
    Location
    Fishkill, NY
    Posts
    5

    Default

    Anyone still running the vci's what are your current *2015*setups/configs?
    (Im doing things the stupid way- new rig running windows 10- which as its own issues)

  5. #5
    Tech Mentor
    Join Date
    May 2011
    Location
    Mannheim / Germany
    Posts
    299

    Default

    i run the current traktor version on a macbook with NIs audio2 (MK1) and the vci 100 (fw1.4).
    i mapped an edit of djtts last two mappings for the VCI. its still in work (and always will). As soon as i have time to finish the walkthrough, i will upload it here.
    It is a 4 deck mapping with superknobs, FaderFX & JogFX, HotCueMode, loops... for internal mixing.

    i use my keyboard aswell, mapped it for freeze/slicer, preparation mode, hotcues, transport,... For this one, im writing a walkthrough, too.
    MacBookPro 11,1 | i5 2,4GHz | 16 GB RAM | 256 GB SSD
    MacOSX 10.11 | TraktorPro 2.10
    VCI-100 SE FW 1.4 | Traktor Audio2 MK1 FW 2.8.0

  6. #6
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    6,862

    Default

    Quote Originally Posted by c0nsul View Post
    i run the current traktor version on a macbook with NIs audio2 (MK1) and the vci 100 (fw1.4).
    i mapped an edit of djtts last two mappings for the VCI. its still in work (and always will). As soon as i have time to finish the walkthrough, i will upload it here.
    It is a 4 deck mapping with superknobs, FaderFX & JogFX, HotCueMode, loops... for internal mixing.

    i use my keyboard aswell, mapped it for freeze/slicer, preparation mode, hotcues, transport,... For this one, im writing a walkthrough, too.
    Sounds like a fun to mix with! Any recorded mixes using that mapping?

  7. #7
    Tech Mentor
    Join Date
    May 2011
    Location
    Mannheim / Germany
    Posts
    299

    Default

    Quote Originally Posted by Stewe View Post
    Sounds like a fun to mix with! Any recorded mixes using that mapping?
    It is a lot of fun. But, I have no FX mayhem mixes online. I have a new mix on mixcloud, but I dont use FX on it.
    Instead of enhancing/improving/enhancing my mixes, I spend most of the time with tweaking my mappings.

    I decided to upload my VCI-100 & (MAC) keyboard mappings on sunday. They are not finished and I still want to change a lot. Also
    the manuals arent ready, but Ill publish them.
    The tsis are pretty stable, although its a very complex mapping (for my skill level). I could need feedback to some changes I want to make. So, before I change the direction from "4TrackDecks" into "2TrackDecks + 2RemixDecks", I upload the files tomorrow.

    Hope some folks here will wipe the dust of their VCIs.
    MacBookPro 11,1 | i5 2,4GHz | 16 GB RAM | 256 GB SSD
    MacOSX 10.11 | TraktorPro 2.10
    VCI-100 SE FW 1.4 | Traktor Audio2 MK1 FW 2.8.0

  8. #8
    Tech Mentor
    Join Date
    May 2011
    Location
    Mannheim / Germany
    Posts
    299

    Default

    mappings are online.

    https://maps.djtechtools.com/mappings/4255 keyboard mapping

    https://maps.djtechtools.com/mappings/4254 VCI mapping

    walkthrough and mappings are not finished.
    feedback and questions are welcome.
    MacBookPro 11,1 | i5 2,4GHz | 16 GB RAM | 256 GB SSD
    MacOSX 10.11 | TraktorPro 2.10
    VCI-100 SE FW 1.4 | Traktor Audio2 MK1 FW 2.8.0

  9. #9
    Tech Convert
    Join Date
    Feb 2009
    Posts
    10

    Default

    Does it works with original firmware?

  10. #10
    Tech Mentor
    Join Date
    May 2011
    Location
    Mannheim / Germany
    Posts
    299

    Default

    My VCI mapping will not work properly with firmware version < 1.4!
    MacBookPro 11,1 | i5 2,4GHz | 16 GB RAM | 256 GB SSD
    MacOSX 10.11 | TraktorPro 2.10
    VCI-100 SE FW 1.4 | Traktor Audio2 MK1 FW 2.8.0

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •