Xone K2 - Mapping Loop Size and Set in Traktor.....FAIL!!!! - Page 2
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32
  1. #11
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    Stewe, thanks so much. I fell asleep.
    I will try mapping again. The bulk of my mappings came from another map i found online.
    I will make a fresh mapping and see if it works.

    Also, the exact same issue has been reported by other users as well and it seems flux mode has something to do with it.
    I will try my luck again today.....hmmm

    Thanks Stewe! I'll keep u posted. Its so frustrating!

  2. #12
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    Can u post the link of that video, i cant see it embedded as youtube is banned in my country.......

  3. #13
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    That mapping is uploaded in the MAPS section: https://maps.djtechtools.com/mappings/2110
    Perhaps you'll have better luck if you download and see how the author has properly mapped those encoders.

    And yes, please attach your mapping in the reply! I can look into it for you and kinda read commands without the controller to ensure that the encoder doesn't click some redundant function.

    Luck!

  4. #14
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    Stewe......hoe do i attach the mapping here ??

  5. #15
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default How to add attachments

    Uploading attachments is pretty simple. Just follow this couple of steps:


  6. #16
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    there u go......

    I tried:

    * A new mapping on a different midi channel.
    * Re-Mapping the whole thing from scratch.
    * Played with the layer system.
    * Won;t even work if i try different buttons.

    No go!! The Loop size encoder works just fine. But i cannot trigger/Toggle Loop on/off......
    Attached Files Attached Files

  7. #17
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Quote Originally Posted by nynemusic View Post
    I tried:

    * A new mapping on a different midi channel.
    * Re-Mapping the whole thing from scratch.
    * Played with the layer system.
    * Won;t even work if i try different buttons.
    Well, if all of that didn't help, and you can't make it work with computer keyboard ether, than it might got something with Traktor... (although, I don't remember of this bug and I use traktor for more than 14 years)

    -Can you test other midi controllers?
    -What Traktor version you're at? Legit one?
    -Double check if the Flux mode is Off?

    Your mapping didn't help me figure out anything since the loop set commands are not even mapped in. Assuming you're under 2.5.0 so newer version couldn't pick up deck commands correctly.

  8. #18
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    Hey Stewe, am on 2.6.8, mac 10.8.4, macbook pro.
    I will test another midi controller in the morning. I did double check and flux was off.
    This is very annoying as again, sometimes it maps correctly and works. Then it stops working.......

    I am thinking of a fresh re-install tomorrow.
    I really appreciate your help Stewe. Will keep you updated on this thread!
    I give up for tonight and am going to sleep!
    Bummer!

  9. #19
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Quote Originally Posted by nynemusic View Post
    This is very annoying as again, sometimes it maps correctly and works. Then it stops working.......
    Hmmm... Do you have some other controllers in your setup? and in case you do, are MIDI in-port and out-port of your mapping set to "ALL PORTS"?

    With all ports enabled and multiple controllers plugged in, there could come to massage conflicts between controllers if both controllers are sharing the same Note/CC massage. Therefor, your mapping ports should be set to the K2 controller!

    just throwing some darts in the dark...

  10. #20
    Tech Mentor
    Join Date
    May 2011
    Posts
    164

    Default

    Hey Stewe!

    I dont have any other maps so the IN/OUT ports are set to the K2.
    I have the installers for 2.6.0, 2.6.1, 2.6.4, 2.6.8 and 2.7.3
    Hesitant about 2.7 as ive read its not stable, but will try downgrading from 2.6.8.

    I want to first uninstall Traktor completely but want to be able to retain my track comments and tags that i have created. I dont use playlists, so they can go to.
    Which folder/files should i save and which should i delete for a complete fresh install.

    Will test with other MIDI controllers today as well.
    Talk soon!
    Cheers Stewe!

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •