Switching Thud Rumble TR-1S Mini Innofader to Traktor S8
Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Jun 2015
    Posts
    2

    Default Switching Thud Rumble TR-1S Mini Innofader to Traktor S8

    Hi all,

    I was just wondering if I could switch the mini innofader from my TR-1S mixer to Traktor S8. I've seen tutorials online and it requires you to connect the fader with a blue, yellow green fader cable to the mixer cable which I am not sure if I'll have to buy it else where.

    Thanks!

  2. #2
    Tech Mentor P4ULSON's Avatar
    Join Date
    Aug 2012
    Location
    The West Coast
    Posts
    274

    Default

    There should be a green cable already on the Innofader on the TR-1S. and if you need additional cables Elliot or Philip will get some to you. You can hit them up on the Innofader website. I removed a innofader off the Dif-1M it was held on with a little glue but looked standard 4 pin and the S8 is 4 pin.

  3. #3
    Newbie
    Join Date
    Jun 2015
    Posts
    2

    Default

    Quote Originally Posted by P4ULSON View Post
    There should be a green cable already on the Innofader on the TR-1S. and if you need additional cables Elliot or Philip will get some to you. You can hit them up on the Innofader website. I removed a innofader off the Dif-1M it was held on with a little glue but looked standard 4 pin and the S8 is 4 pin.
    Hi P4UL, Thank you for your reply!

    So I should remove the fader along with the cable that is glued to it and connect it to the mixer cable on the S8?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •