Help mapping a specific action

[Sulherokhh]

Do you have multiple mappings active?

It's easiest to isolate the problem by only having a single mapping active at the same time.

[Method in chaos]

Nope. only the default. I'm doing my mapping "on top" of the default since that is the only way the option to override actions is available.

[Sulherokhh]

I'll try to replicate it on my s4. LED's are quite doable. Back in a little while.

[Sulherokhh]

For the hotcue LED's:

One Out-Assignment for every color there is with
condition m7=1
condition cue type = -
midi range 0 - 0

One Out-Assignment for every color except yellow
condition m7=1
condition cue type = cue
midi range 0 - 0

One Out-Assignment for every color except light orange
condition m7=1
condition cue type = loop
midi range 0 - 0

plus what you already have there.

...


you can probably skip the colors that the s2's factory mapping doesn't use for different hotcue types anyway.

[Sulherokhh]

select/set+store hotcue needs the conditions
m8=1 PLUS "m6=0"

that way the hotcue doesn't trigger when shift is held down.


Edit: addendum

Has nothing to do with the hotcues - remove the m8=1 condition from the shift button and add m6=0 to the reset button - result is that you can use the factory function of the reset button if you hold shift down.

[Method in chaos]

wow, thanks a lot man. I will try your advice tonight when I get home and report back.

[Method in chaos]

For the hotcue LED's:

One Out-Assignment for every color there is with
condition m7=1
condition cue type = -
midi range 0 - 0

One Out-Assignment for every color except yellow
condition m7=1
condition cue type = cue
midi range 0 - 0

One Out-Assignment for every color except light orange
condition m7=1
condition cue type = loop
midi range 0 - 0

plus what you already have there.

...


you can probably skip the colors that the s2's factory mapping doesn't use for different hotcue types anyway.

Mmmmh, gotcha. Basically what you do is tell it to show every other color in 0 when m7 is active. Sneaky! lol.

[Method in chaos]

select/set+store hotcue needs the conditions
m8=1 PLUS "m6=0"

that way the hotcue doesn't trigger when shift is held down.

Oh! I see what you mean! Can't wait to get home and try it. Thanks a lot again man. All this mapping stuff is very exciting!

[Sulherokhh]

[Method in chaos]

select/set+store hotcue needs the conditions
m8=1 PLUS "m6=0"

That did the trick!! and i had to use "delete current hotcue". tomorrow I'll try the "leds off mapping". I'm almost there! thanks to you guys!