i need to know if the top two connections (input right and left) are xlr connections or something other..
greets
i need to know if the top two connections (input right and left) are xlr connections or something other..
greets
They are XLR
DVS setup: Traktor Scratch Pro, 2 X Denon DPDJ-101, Numark DXM06, Novation Dicer, Compaq Presario F750CA, Audio 8DJ
Controller setup: Traktor Scratch Pro, 2 X Denon DN-SC2000, Denon DN120X, Compaq Presario F750CA, Audio 2DJ,
thanks!!!
btw, what is the difference between xlr male/female and cinch male/female?
Last edited by DennisJ; 11-19-2009 at 01:18 PM.
female has a hole and male has a plug
xlr female ->
xlr male ->
chinch female ->
male chinch ->
jack female ->
jack male ->
Last edited by Ed Paris; 11-19-2009 at 01:38 PM.
I'm just a girl, standing in front of a boy, asking him to love her.
Setup: TP 3, Kontrol S5, MF Twister, MF3D, MF Classic, DIY-Midifighter, Aiaiai Tma-1
are they? doesn't look so for me..
but xlr to cinch which will go into the mixer should go well, right?
yap it works...i have 2 adapters at home in case i have to bring my own mixer to a club!
I'm just a girl, standing in front of a boy, asking him to love her.
LMAO
Took me ages to work out what people were referring to by "cinch", its caled an RCA Phono connection
OK whats happening here is that every speaker system needs a "crossover" which is that part that splits the music up, taking the bass and sending it to the subs and taking the mid and sending it to the mid cones and the high frequencies and sending them to the horn or compression driver or whatever. Sometimes this is a stand alone unit in a rack with the amplifiers and sometimes as in this case its built into the speaker or subwoofer.
So what you have to do here is take the main output of your mixer and put it first into the back of the sub (what your actually doing is feeding it into the crossover built into the sub).
On the mixer side this will be your normal red and white Phono connections (or what everyone here is calling a chinch although in 12 years as a sound engineer and DJ i have never heard that name ) and on the subwoofer side you have two input choices, either Jacks which are the two top connections or XLRs which are the two 3 pin connections just below them. So you'll need either a cable that has two red and white phono's going to two jacks, or one that has two red and white phono's going to two XLRs. Either will work just whatever one you can get.
(note jacks can also sometimes be called "Phone" connections from the days when big patchbays of them were used when wee women operators used to sit and manually make the connections for telephone calls, so don't get this confused with the red and white "Phono" with an 'o' connections, as in phonographic because they were developed by the phonographic record industry way back in the day.)
Once the music signal is inside the subwoofer, the crossover will take the bass out and send it to the built in amplifier and then the subwoofer's speaker, and it'll put all of the mid and top frequencies back out of the bottom most connections (which are called "speakons") which you then link to your top speakers (and so you'll need two speakon to speakon leads for that bit).
k
Last edited by kevinmcdonough; 11-19-2009 at 07:04 PM.
|
Bookmarks