Midifighter Twister - Firmware - No update since August 2014 - Page 5
Page 5 of 9 FirstFirst 123456789 LastLast
Results 41 to 50 of 83
  1. #41
    Mr. Golden EanGolden's Avatar
    Join Date
    Mar 2008
    Location
    San Francisco
    Posts
    970

    Default

    Hey Everyone! I am very happy to report that we have a final firmware build ready for public release. A lot of work and attention went into this - thanks to everyone that helped!

    Midi_Fighter_Twister_20160623.hex.zip

    • The final release firmware is attatched
    • nearly everything we are aware of was addressed
    • the MF ulitility will be updated with this firmware in 3-5 days


    The following items were addressed:

    - Request 04: Button Toggle Feedback (Note Cases)
    - Request 05: Default Colors (new color scheme)
    - Request 11: MIDI Feedback with Custom Note Mappings (MIDI Type Filtering)
    - Request 17: 3F/41 Fine Adjust, does not function for Relative Encoders (Multiples)
    - Request 03: Speed up LED response to incoming MIDI
    - Request 08: Shift Encoder for Relative Encoders
    - Request 09: Encoder Shift Overlap
    - Request 10: Animations and the MIDI Clock
    - Request 13: Shorten/Eliminate Feedback Ignore Counter for Relative Encoders
    - Request 19: Encoder Shift Toggle Inconsistency
    - Request 12: Encoder Animation Channel Split -
    - Request 22: Switches set as 'Encoder Shift' do not accept MIDI Feedback from Software
    - Request 27: Encoders do not Output Value 64
    - Request 15: Shifted Encoders do not receive MIDI Feedback
    - Request 16: Matching MIDI Mappings in Differing Banks do not react as expected
    - Request 18: 3F/41 - Reset Value, does not function for Relative Encoders
    - Request 19: Encoder Shift Toggle Inconsistency
    - Request 20: Encoders set as ENC need to be turned right before sending MIDI
    - Request 21: Shift Encoder Redundantly Output at Extremities
    - Request 23: Animation Reset Bug
    - Request 24: Animation Speedup
    - Request 25: MIDI Feedback Speedup

    If anyone is interested in working on the firmware themselves email me and we will share the code with you directly ean (at) eangolden.com

  2. #42
    Tech Guru DJDoubleYou's Avatar
    Join Date
    Mar 2011
    Location
    Hyperspace
    Posts
    1,267

    Default

    Quote Originally Posted by EanGolden View Post
    If anyone is interested in working on the firmware themselves email me and we will share the code with you directly ean (at) eangolden.com
    Does this apply for the MF spectra source too?
    MF Pro & Spectra | Kontrol S4 MKI | 2x Kontrol S1 MKI | MC-1000 | Generic MKI

  3. #43
    Tech Convert
    Join Date
    Mar 2016
    Posts
    18

    Default

    Hello Ean,

    great news! Sorry for not giving feedback on the first firmware updates, but I was very busy lately. The encoders are responding directly to incoming midi massages now - perfect.

    Thanks for pushing forward this very needed firmware update!

    Will contact you for the code... and yes, please include the spectra code.

  4. #44
    Tech Convert
    Join Date
    Jun 2016
    Posts
    5

    Default

    @EanGolden

    Hi, thanks for update!
    I've find bug around Detent mode.

    NEW DETENT BUG 1

    • SETTING: Has Detent = true, Sensitivity = High Resolusion.
    • BUG:-> when I increase value from 0 (or from less than 63), the detent stops the value on 63. when I decrease value from 127 (or from more than 64), the detent stops the value on 64.


    NEW DETENT BUG 2

    • SETTING: Has Detent = true, Sensitivity = Responsive.
    • BUG:-> detent stops the value on 64 or 63.


    thanks

    Quote Originally Posted by EanGolden View Post
    - Request 27: Encoders do not Output Value 64

  5. #45
    Newbie
    Join Date
    May 2016
    Posts
    3

    Default

    i just tried the shift encoder toggle in relative mode.
    thanks a lot!

    a little request if possible. adjustable sensitivity with a multiplier to lower the "high sensitivity" would be great.

    best regards...

  6. #46
    DJTT Administrator del Ritmo padi_04's Avatar
    Join Date
    Nov 2009
    Location
    Argentina
    Posts
    6,553

    Default

    Quote Originally Posted by 5hut0 View Post
    NEW DETENT BUG 1

    • SETTING: Has Detent = true, Sensitivity = High Resolusion.
    • BUG:-> when I increase value from 0 (or from less than 63), the detent stops the value on 63. when I decrease value from 127 (or from more than 64), the detent stops the value on 64.


    NEW DETENT BUG 2

    • SETTING: Has Detent = true, Sensitivity = Responsive.
    • BUG:-> detent stops the value on 64 or 63.



    Try a factory reset, it's sending the right values on my end. The detent will cause the encoder to naturally stick around it a bit to make it easier to reset the knob, kinda like a physical detent does.

  7. #47
    Tech Convert
    Join Date
    Jun 2016
    Posts
    5

    Default

    Quote Originally Posted by padi_04 View Post
    [/LIST]


    Try a factory reset, it's sending the right values on my end. The detent will cause the encoder to naturally stick around it a bit to make it easier to reset the knob, kinda like a physical detent does.
    thanks for reply. but, factory reset does not work on my end. on yours, detent stops value on 64 every time?

  8. #48
    DJTT Administrator del Ritmo padi_04's Avatar
    Join Date
    Nov 2009
    Location
    Argentina
    Posts
    6,553

    Default

    Are you setting the detent for a CC or ENC 3FH/f1F?

  9. #49
    Tech Convert
    Join Date
    Jun 2016
    Posts
    5

    Default

    Quote Originally Posted by padi_04 View Post
    Are you setting the detent for a CC or ENC 3FH/f1F?
    for a CC. I'm setting like this below.

    Screenshot 2016-06-25 00.52.06.jpg

  10. #50
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Quote Originally Posted by 5hut0 View Post
    @EanGolden

    Hi, thanks for update!
    I've find bug around Detent mode.

    NEW DETENT BUG 1

    • SETTING: Has Detent = true, Sensitivity = High Resolusion.
    • BUG:-> when I increase value from 0 (or from less than 63), the detent stops the value on 63. when I decrease value from 127 (or from more than 64), the detent stops the value on 64.


    NEW DETENT BUG 2

    • SETTING: Has Detent = true, Sensitivity = Responsive.
    • BUG:-> detent stops the value on 64 or 63.


    thanks
    This works fine on my end. What you're describing is actually a normal behavior for De-Tented knobs - encoder has a small delay built in between values 63 and 64 that helps you easily reset the value ie: center of LP/HP Filter in Traktor.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •