Traktor S4 and Komplete Audio 6
Results 1 to 4 of 4
  1. #1
    Newbie Morsha's Avatar
    Join Date
    Jun 2016
    Posts
    1

    Default Traktor S4 and Komplete Audio 6

    Hello there...
    As u can see from the title what I need is an advice of how to hook up my Traktor S4 and Komplete Audio 6 to my speakers(Rokit 5) so I can use them both independently from one another(S4 for Traktor,and KA6 for Ableton)and(without the s4 as agregat device for Traktor) so I was thinking that the best way will be by plugin them in some mixer though I don't have an idеа what mixer exactly will be good.
    The inputs on the KA6 are enough for me so I'm not planing to use the mixer from anything different but "bridge".


    So am I on the right way,will it work?
    If yes,can u pls recommend me the right mixer to a maximum of 100-150?

  2. #2
    Tech Guru the_bastet's Avatar
    Join Date
    May 2012
    Location
    Cincinnati, OH
    Posts
    2,265

    Default

    Run the master out from your S4 to the inputs 1 and 2 on your Komplete 6 with monitor turned on. Run the outputs 1 and 2 to your monitors. Now you will have the audio from both.
    - Equipment - Audio Technica ATLP1240's, Allen & Heath DB4, RekordBoxDJ
    - DAW - Cubase 9 Pro, FL Studio

  3. #3
    Tech Wizard
    Join Date
    May 2016
    Posts
    38

    Default

    https://www.storedj.com.au/behringer...nel-line-mixer

    I use that as sort of sub mixer for my volca set up, cheap cheerfull sounds good. All 4 volcas plugged in then out put to djm750. So you could s4 to channel one and ka6 channel two then output to speakers

  4. #4
    Tech Guru happydan's Avatar
    Join Date
    Jun 2009
    Location
    West Yorkshire
    Posts
    1,369

    Default

    Quote Originally Posted by Mrbigtoe View Post
    https://www.storedj.com.au/behringer...nel-line-mixer

    I use that as sort of sub mixer for my volca set up, cheap cheerfull sounds good. All 4 volcas plugged in then out put to djm750. So you could s4 to channel one and ka6 channel two then output to speakers
    Oh god, no. These things are trash. I have one and immediately upgraded to a small mixing board instead.You can probably pick up a preowned Xenyx for a bit more than the cost of the MX400.

    It's also important to know that the MX400 is mono output.
    A&H Xone:62 | 2 x NI Kontrol X1 MK2 | 2 x 1210s | TSP2 | Audio 10 | Apple Macbook Pro 13 inch | Sennheiser HD7 DJ | Ableton Push
    read: http://djworx.com/author/dan-morse
    talk: http://facebook.com/bleephudds
    listen: http://mixcloud.com/bleephudds

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •