I connected the Turntable to the audio interface and output of the audio interface is connected to the mixer. I think i've done this correctly.
I connected the Turntable to the audio interface and output of the audio interface is connected to the mixer. I think i've done this correctly.
I Loaded up a song in traktor and couldn't get any sound now as well
Screen Shot 2018-02-05 at 00.13.40.jpg
Post a screenshot of your audio routing prefs.
A&H Xone:96 | Xone:K1 | 2 x 1210s | Traktor Pro 3 | Apple Macbook Pro (2015) 13" | Sennheiser HD7 DJ | Maschine Mikro Mk3
read: http://djworx.com/author/dan-morse
talk: http://facebook.com/bleeptechno
listen: http://mixcloud.com/bleephudds
Screen Shot 2018-02-05 at 19.15.53.jpg
Thank you
This guy seems to have successfully connected his Denon 1800 mixer to Traktor Pro.
https://www.youtube.com/watch?v=Zp6b...ature=youtu.be
He’s not using timecode.
And yes, the X1800 does work with Serato DVS without an additional audio interface.
Last edited by ErikMinekus; 02-05-2018 at 06:55 PM.
I have the additional audio interface. I have no idea why I can't get any sound to come out of Traktor. Any suggestions?
Earlier you said you did have sound coming out of it, but it was distorted.
Either way, does the channel's OUT light up on the Audio 10 when playing music? If not, either Traktor is setup wrong or your sound card is broken. If it does light up, then either the Audio 10 is not connected to the correct LINE input on the mixer, or the input selector on top of the mixer is wrong.
Regarding timecode, once you have the vinyls make sure the Input Routing is the same as the Output Routing, and under Timecode Setup set the decks to Scratch Control and make sure the signal comes in correctly. See the manual on what it's supposed to look like.
Last edited by ErikMinekus; 02-06-2018 at 05:25 PM.
|
Bookmarks