Originally Posted by
Nspark21
Hi guys, i have been doing the same. can i ask if anybody has managed to get the pad select sections LED's working like they do in serato? Once i had the serato dj subscription but i dont now. If i loaded serato 1st, the button LED's would flash when pressed with shift or in a row(once + shift slow flash, twice + shift flash quickly, solid light default, press again flsh). I could then close serato and open traktor to use my mapping and the LEDs would continue to work on the pad select buttons as if it was still using serato. This is handy to see which mode the pads were in.
so here is a brief of what the buttons supposed to do:
The 4 buttons are all 1 note, with different velocities (16 different velocities) - the controller only sends these velocities if i have opened serato then closed it. The controller buttons only flash at different rates when pressed once I have done the same (open closed serato).
Im wondering if theres a way to get the controller working the same (as far as the pad select modes are concerned) as if i opened serato first, in traktor with the flashing lights for these buttons. Is there some sort of message sent back and forth to enable this? or is this just down to the controller firmware?
#If i dont open serato, the 4 buttons stay solid green.
Anybody managed to get them flashing?
bellow is a very confusing 'diagram' of what the buttons do in different modes. Also note when swiching between buttons; 1-2 , 1 -4 1- 3, or 2-1, 4-2, the pad notes are all changed for cue, loop, seq,, sampler. but for different modes for the same button, the pads stay the same note. So all i can think of is having a modifier or 2 to track which button or mode of the same button the pads are in.
Button 1 Hotcue - velocity x
HOT CUE - 1 PRESS (OR DEFult). Cue Loop - 2nd press Pitch Play - shift press. another mode - shift 2nd press
button 2 LOOP velocity x velocity x velocity x
LOOP - 1 PRESS (or default). split beat jump / auto lloop manual loop another mode
button 3 - velocity x
SEQUENCER (or default)
button 4 velocity x
SAMPLER - 1 PRESS (OR DEFAULT) slicer freeze mode another mode
also sorry for my cconfusing engllish skills, i blame my laptop, so thanks for taking the time to read this.
Bookmarks