2019 Traktor Pro 3 mappings for Pioneer controllers (SX2, SZ, 1000, etc)
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default 2019 Traktor Pro 3 mappings for Pioneer controllers (SX2, SZ, 1000, etc)

    Hi

    I’m maintaining the most complete mappings for Traktor Pro 3 for all large Pioneer DDJ controllers.

    There are two MIDI codes sets, so I'm maintaining both in parallel:



    Summary:
    • V6.5.0: Worldwide first traktor mapping for the 1000/800 with jog Screens support. This requires BOME
    • v6.3.0: First version for ddj-1000/800, mass translated from the SX2/SZ/SRT familiy.
    • v6.1.0 : Latest SX2/SZ/SRT version. Major features were TP3 mixerFX, reverse Slip and page shortcuts. Previous features are MacroFX and JogFX.
    • v5.2.3: This was the last SZ/SX2 map made by JaJa in 2015. All my mappings were built on top of his amazing work. In turn this was inspired(?) by the Viper SX1 mapping


    Screens:
    DDJ 1000 bome screens 1.JPG

    Demo:
    all slides - square - LR.jpg
    Last edited by djestrela; 09-02-2019 at 10:20 PM.

  2. #2
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    Mapping Video demos


    Videos are either long ones demoing every single function of the mappings, or update videos showing latest versions.


    DDJ-1000/800 playlist: https://www.youtube.com/playlist?lis...T6P42noqvkPISD



    DDJ-SX2/SZ/SRT playlist: https://www.youtube.com/playlist?lis...q4hpeu0o_XyP2l



    AKAI AMX playlist: https://www.youtube.com/playlist?lis...bmOJdVQCW6CohR




    DDJ-1000/SZ/SX2 mapping Change Log:


    - v6.5.0 - September 2019 - Jog Screens using BOME
    - New features:
    - MAJOR new version supporting the Jog Screns via BOME.
    - Please read the dedicated FAQ and join the technical discussion on the DJTT forum!
    - Significant improvements to scratching. Split Vinyl ON/OFF modes per deck.
    - URL:
    - Download: https://maps.djtechtools.com/mappings/9279
    - Technical discussion: http://forum.djtechtools.com/showthread.php?t=96024

    - v6.3.3 - June 2019 - SpinBacks and Jog Ring
    - Fixes:
    - SpinBacks are now possible
    - Jog ring now displays the jog mode: Constant = volume up; blinking = jogFX enabled
    - added master info to screens
    - added final official installation instructions for INTERNAL/EXTERNAL controllers

    - v6.3.2 - May 2019 - minor changes requested several times
    - Fixes:
    - Play/Pause is now immediate "on press", instead of "on release"
    - Sync is now toggle instead of phase sync
    - Please note that "Set Master" still uses shift2
    - added list of limitations, plus the old official Pioneer installation instructions

    - v6.3.1 - March 2019 - Minor DDJ-1000 bugfixes
    - Fixes:
    - Cue monitor volume / Cue mix fixes
    - Parallel waveforms: removed automatic promotion to advanced size (this would require an improvement on TP3.1 itself)
    - Known issues:
    - Provide option to either toggle Sync / Direct sync
    - Selecting different FX should call save snapshot to ensure the same parameters are kept


    - v6.3.0 - Feb 2019 - First DDJ-1000 release by DJ_Estrela (for TP3)
    - New features:
    - Full port of previous mapping to the DDJ-1000 midi codes
    - All modes moved to main pages; quick cycle pages
    - Preview Player, Vinyl Break FX
    - Keyboard mode, updated Roll modes

    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/9279
    - FB: https://www.facebook.com/pedro.vale....44380098947850
    - YT: https://www.youtube.com/watch?v=EkSJ9Ug9Zuk


    - v6.1.0 - Feb 2019 - First DDJ-SX2 release by DJ_Estrela (for TP3)
    - New features:
    - TP3 MixerFX, TP3 Reverse Slip
    - Param "<" cycles between most used pages (MacroFX + mixerFX)

    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/9222
    - YT: https://www.youtube.com/watch?v=sanF35CYeSg


    - v6.0.0 - Aug 2018 - First DDJ-SZ release by DJ_Estrela (for TP2)
    - Major new features:
    - MacroFX
    - BeatFX

    - Minor new features:
    - Tempo Cycle 6%, 10%, 16%, 100%
    - Loop/Beatjump merged with shift2
    - Pressing hot cue cancels out special modes

    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/8671
    - YT: http://youtu.be/H_TE2mtuM6Q

    - v5.2.0 - March 2015 - Last DDJ-SZ release by JAJA (for TP2)
    - Features:
    - JogFX, PadFX, Slicer, ...
    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/2629
    - FB: https://www.facebook.com/Artwork.Mapping.DDJSZ
    - YT: https://www.youtube.com/watch?v=bNofl07WDkQ

    - v1.3.0 - Nov 2014 - Last DDJ-SX2 release by JAJA for TP2
    - Features:
    - JogFX, PadFX

    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/3695
    - FB: https://www.facebook.com/Artwork.Mapping.TSI
    - YT: https://www.youtube.com/user/artworkmixs/videos

    - v0.9.4 - Sep 2014- Last DDJ-SX1 by JAJA (for TP2)
    - Features:
    - JogFX, ComboFX
    - URL:
    - DJTT: https://maps.djtechtools.com/mappings/1336
    - FB: https://www.facebook.com/Artwork.Mapping.TSI
    - YT: https://www.youtube.com/watch?v=L-biJ-nuwWc
    Last edited by djestrela; 09-02-2019 at 10:31 PM.
    Gear: DDJ-1000, DDJ-SZ, DDJ-SX2, Akai AMX. Laptop: Dell XPS 15
    Mappings for all this gear: https://my.djtechtools.com/users/830428

  3. #3
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    I've now ported my lastest SX2 traktor mapping to the DDJ-1000, which I now made as tight as possible (Jogs, VU meters, custom buttons).
    A second major change is that all FX modes are now in the front positions - accessible without shifts. Pressing the mode button cycles the top-2 pages per mode.
    Other new features are a Preview Player, a Vinyl Break FX, Keyboard mode and updated Roll modes with/without quantization.



    https://maps.djtechtools.com/mappings/9279
    https://www.facebook.com/pedro.vale....44380098947850
    Gear: DDJ-1000, DDJ-SZ, DDJ-SX2, Akai AMX. Laptop: Dell XPS 15
    Mappings for all this gear: https://my.djtechtools.com/users/830428

  4. #4
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    Update: just tested that v6.1.0, adapted for SX2, works fine on the SZ.

    Next steps will be made on the SZ, as follows:
    - port top 2x sub pages selection from 1000 back into SZ. Also latest v6.3.1 bug fixes from 1000 into SZ
    - 2x sync modes, selectable, to match temposync and beatsync. parallel waveforms fixes

    - use unique OSC buttons to trigger mixferFX as well
    - first cut of the latest S4 mk3 pattern recorder into the SZ

  5. #5
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    Released v6.3.3 with several bug fixes and feature requests


    Jog screens update: I've now coded all the functions inside BOME Midi translator Pro that generates all the screen elements of the controller (current BPM, needle, track position, etc). However it will still take a while to release this because I don't have my 1000 with me in the very short term.

    PS: In this process I had to do a lot of BOME tricks that I will explain if anybody is interested (eg, higher resolution 7 bits messages, relative to absolute track position using a clock, etc)

  6. #6

    Default

    I'd love to know more details about how to control the screens on the DDJ-800 and 1000.

  7. #7
    Tech Guru the_bastet's Avatar
    Join Date
    May 2012
    Location
    Cincinnati, OH
    Posts
    2,764

    Default

    Quote Originally Posted by ErikMinekus View Post
    I'd love to know more details about how to control the screens on the DDJ-800 and 1000.
    Likewise
    - Equipment - 2X Technics 1200, 2X Audio Technica ATLP1240, 2X XDJ700, 2X XDJ1000 MK2, Denon DNX-1100, Mixars DUO, DJM750 MK2, NI Audio 10, NI Aduio 4, Serato SL3, 4X Shure M44-7, 2X Ortofon Pro S, 2X Numark Groove Tool, Maschine MK3, Samson Carbon 49, Roland SE-02, Novation Launchcontrol, TouchOSC, Nocation Peak, Arturia MiniBrute, Korg Volca Kick, MicroKorg (Classic), NI Komplete Audio 6

  8. #8
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    the 1000 and 800 have the same midi codes OUT for the screens:
    https://github.com/pestrela/music_sc...midi%20out.PNG

    All these entries need 14-bit messages to operate. The needle position is 0..360 degrees, which is above the 127 limit of 7 bit messages. So it needs 2x CC messages for the whole thing.
    Traktor receives 14-bit just fine, but it cannot send 14-bit messages. I've confirmed this by hacking CMDR to make a TSI with combo OUT messages. TSI loaded fine, but no messages were generated by TK.

    My solution is to send the regular beat phase position 0..90 degrees in a single message to BOME (with sign), and add this to its own internal variable that is mod 360. Then BOME can output this 14-bit message in a single go to the 1000.

    --
    There was a lot more tricks required. I will test my mapping in two weeks, and explain all the other tricks once I confirm they work correctly.
    Gear: DDJ-1000, DDJ-SZ, DDJ-SX2, Akai AMX. Laptop: Dell XPS 15
    Mappings for all this gear: https://my.djtechtools.com/users/830428

  9. #9
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    Some updates on the traktor mappings for Pioneer controlers:

    DDJ-1000SRT:
    I've now looked at the MIDI codes for the 1000 SRT version released today, and it is quite surprising:
    - the SRT pad codes match the SX2/SZ style of codes, and not the 1000RB style
    - While the screens look to be MIDI (no waveforms & cover art), there is no public MIDI codes like in the original 1000 RB version
    - the SRT runs in external mode, the 1000RB ran in internal mode. This means that all pioneer effects are there, a significant departure from the 1000RB. It also means the ColorFX buttons cannot be remapped - need to use the pads.

    All together, it is very clear that my SX2/SZ mapping is the best starting point for the 1000SRT by far (pad codes, external mode).
    https://maps.djtechtools.com/mappings/9279

    DDJ-SX3 vs SX2:

    This page has all the signal flows for all popular Pioneer controllers:
    https://github.com/pestrela/music_sc...r/signal_flows

    the SX3 now runs in external mode, just like the SZ. It means the Pioneer color FX can be used to Traktor sources. Also means that the colorFX buttons cannot be remapped.
    Solution: use the current method of using the pads to enable mixerFX/macroFX, that is already on the DDJ-SX2/SZ mapping
    Last edited by djestrela; 08-08-2019 at 12:05 PM.
    Gear: DDJ-1000, DDJ-SZ, DDJ-SX2, Akai AMX. Laptop: Dell XPS 15
    Mappings for all this gear: https://my.djtechtools.com/users/830428

  10. #10
    Tech Wizard
    Join Date
    Aug 2016
    Posts
    60

    Default

    DDJ-1000 - First Jog screens support on Traktor Pro 3 using BOME




    ----
    This is the first traktor mapping supporting the DDJ-1000 screeens. Already working is current BPM, current tempo, time elapsed/remaining and needle position. With a shift layer you can see total time, tempo range, and loop/beatjump sizes (for 2 seconds).

    This mapping is not released yet. To finish is integrating on my existing DD-1000 traktor mapping, and some bug fixes/optimizations. When released IT WILL REQUIRE bome midi translator Pro. A 100% function demo version is here: https://www.bome.com/products/miditranslator#downloads


    Features demo:
    00:00 Current BPM / Tempo percentage
    00:24 Tempo range
    00:35 Min/sec = loop size/jump size (for 2 seconds)
    01:00 Shift1/shift2 = hold to preview loop sizes and total time
    01:08 Toggle time elasped / time remaining
    01:15 Needle position
    01:21 Deck B operation


    Download (soon): https://maps.djtechtools.com/mappings/9279
    More info: http://forum.djtechtools.com/showthread.php?t=96024
    Gear: DDJ-1000, DDJ-SZ, DDJ-SX2, Akai AMX. Laptop: Dell XPS 15
    Mappings for all this gear: https://my.djtechtools.com/users/830428

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •