Denon DN SC 2000 4 Deck problem
Results 1 to 3 of 3
  1. #1
    Tech Wizard
    Join Date
    Jun 2011
    Posts
    23

    Exclamation Denon DN SC 2000 4 Deck problem

    Good Morning DTT Forum,

    Yesterday my new Denon DN SC 2000 Controllers reached (yes two). I have not yet ordered a mixer which most likely is going to be the Numark M6 as its USB and 4 Channel but I'm still not so sure about it.
    Well my actual problem is:

    I can NOT use four decks on Traktor 2. The Denon's have a Deck change button with which you can control two decks per controller. Now the thing is that I can load songs onto Deck A and C on Traktor BUT only onto those, I can not acess Deck's B and D in any way. If i use one of the controllers, the other one is totally unnecessary... Though, it reacts on my actions on the other one (Led's light up the same on both and I can just use the other controller and It does the same job on A and C).

    And yes, I'm using the 4 Deck .tsi mapping for Traktor.

    System Information:

    MacBook Pro i5 (Mac OS Snow Leopard)
    2x Denon DN SC 2000
    No mixer.
    Traktor 2

    Could my problem be caused by me not having a proper mixer?

    Regards,
    DJ Plutrix

  2. #2
    Tech Guru SirReal's Avatar
    Join Date
    May 2010
    Location
    San Fran Bay Area
    Posts
    2,219

    Default

    Yes, you need to change the midi number on the second Denon Deck. The instructions are on the back of the unit. So Deck 1 should be set to midi channels 1-2 and deck 2 should be channels 3-4.

    Let me know if this fixes it.
    "Walking the fine line between Stupidity and Genious" My Soundcloud ---- My Mixcloud
    MBP Retina 2015--TSP 2.10--2xDNSC5000--2xDNSC2900--2xDNSC2000--NI F1--Denon DN-X1700--HDJ2000--Stanton STR8-80--QSC K12's--Crown Amplifier--Urei Monitors

  3. #3
    Tech Student
    Join Date
    Jun 2016
    Posts
    1

    Default Thanks for the help

    To SirReal:

    I was having the same issue with Traktor, I couldn't figure out the 4-deck mapping.

    Changing the channel on the 2nd DN-SC2000 worked, as far as being able to load into decks A and B with the DN-SC2000 on the "blue" deck setting on each.

    However, changing to the "red" deck setting on either doesn't seem to allow me to load any tracks into decks C and D.

    Any idea what to do?


    To DJPlutrix:

    Your (lack of) mixer/DJ interface is not going to have any bearing over your DN-SC2000's interaction with your macbook.


    Thanks
    Avery

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •