Hi All,

I'm wondering if anyone has accomplished this yet, I'm using an APC40, on TPS2.0.2.

My goal is to be able to load into sample decks from the deck in focus a loop, thereby cutting down on the amount of coding needed, and also making it more flexible in terms of which deck I "focus" on when loading a sample from a deck into a sample deck.

Right now, I have this in a limited form with the following logic:

- I have 4 buttons dedicated as 'loading' buttons for Deck 3's sample decks and 4 buttons dedicated as 'loading' buttons for Sample Deck 4's sample decks.
- Below that I have 4 buttons to trigger the sample decks

Note: I separated these as it makes a (coloured) line between my 2 standard decks and my 2 sample decks and I find it easier for me when mixing as I can be loading with one hand and triggering samples with the other.

- The 4 buttons dedicated to 'loading Deck 3's sample decks are set as "Deck A" so they can only load directly from Deck A, and not B, or C (Note: I know I could add modifiers for this, but that's a heavy load of programming I want to avoid if possible
- The same logic applies for the 4 buttons dedicated to 'loading' deck 4's sample decks, but they are set to load from Deck B

Just curious if anyone has been able to accomplish something like this to date, it would definitely add a great deal of flexibility as it would allow me to load from whatever deck I have in focus at the given time (I already have buttons to control focus), therefore if I were operating with 3 standard decks and 1 sample deck I could pick and choose more intuitively.

Any assistance is appreciated, thanks!