Xone K2/Traktor - 2 Decks, Ext Mixer, 4 FX Units Mapping

[nynemusic]

Could not successfully upload in the mapping section, so posting here!


K2 Latching Layers off, Midi Chan 13

* The Button Matrix at the bottom and bottom and top Encoders are vertically split between Deck A and Deck B.
* Faders are FX Dry/WEt (from Left to Right) FX1, FX3, FX4, FX2 (thats how i use them!)
* Tem Dn and Tem Up buttons mean Pitch Bend Up and Down.....i wrote wrong!

Shift/Exit Setup and Layer buttons are: Shift: Modifier 1, Layer: Modifier 2

Bottom 2 Encoders are browse track and load on push. I open and close the browser with the space bar....
Outer Top Encoders are Loop Size Select and Loop Set on push, Inner 2 encoders are deck gain and Set as Tempo Master on Push.

Faders, 3 knobs and corresponding buttons are all used for effects.
The bottom row labelled R1, R2, R3, R4 are basically FX unit button 1 for the corresponding FX units, however:

M2+R1= Unload Deck A
M1+R4= Unload Deck B
M2+R2 = Set Grid Marker Deck A
M1+R3 = Set Grid Marker Deck B

FX Assign:
Deck A: (M2+) Temp DN, UP, HC1, HC2 = Fx1, Fx2, Fx3, Fx4

Deck B: As above with M1+.......

Beat Jump -16 and +16:
Deck A: M2+ FX1, M2+FX3

Deck B: M1+FX4, M1+FX2

Most features have LED feedback, other than Pitch Bend, and the Hot Cues are always lit regardless of a Hot Cue being set or not.
Still work in progress, enjoy!

Cheers!
Faisal

[nynemusic]

OOOPS!!!!
Forgot:

M2+ FX1 Dry/Wet = Deck A Tempo Adjust
M1+ Fx2 Dry/Wet = Deck B Tempo Adjust

Enjoy!