Sharing Map 1.0

so, i searched around a bunch and asked a few questions and i thought i would share my map in its current state. for my v1 it seems pretty workable. leds and led rings seem to work well. there's some space left for future enhancements.

- shift+load places the track into the deck and begins play
- cue slots are red, then blinking green when loaded, solid when active
- play is blinking green in pause state, solid when play
- del + cue will delete a cue
- set a cue by touching the cue button
- load sampl + sampl play loads sample deck c/d from deck a/b
- samples are red when empty, blinking green when loaded, solid green when playing
- bpm signal is a visual indicator of the bpm
- mas vol is a vu meter of the master out
- filters instead of EQ


http://wearepartypushers.com/stuff/S...TP2MapV1_1.png

next enhancement will be adding the loop recorder... simply going to map Dry/Wet to the x-fader and then map Size, Rec and Del to the buttons above.

apparently forgot :p

updated to 1.1 with loop recorder...

This looks good Shane, nice and clean, not overly complex, I'm definitely going to load this one up to see what I can learn from it on my own version! Thanks for sharing!

Quote:

---

Originally Posted by Graham Campbell

This looks good Shane, nice and clean, not overly complex, I'm definitely going to load this one up to see what I can learn from it on my own version! Thanks for sharing!

---

thanks graham. for whatever reason, i noticed that my FX 1 On buttons were acting whacky. not sure why, i had to delete them and remap them for them to function correctly again. I noticed I ran into scenarios like this over the past week where mappings would appear to work but then become wonky. all in all, everything should be working pretty good.

if you do run across any issues, please post them here so i can fix them.

This looks pretty sweet. I sold my APC before coming to Traktor but im pretty sure that with this map i'd be rocking!!! ;)

Nice work man!!

ps..... Sync??

Quote:

---

Originally Posted by kooper1980

ps..... Sync??

---

the sync function is mapped to the play/pause function...

here's how i work the deck:

1. Fader on Deck A down
2. Load track into Deck A
3. Deck A starts play on load AND activates sync
4. Tap cue point to ready track
5. Release cue point
6. Bring fader up

I should also mention I work off Master Tempo... so everything - sample decks and track decks are locked to Master Tempo... you can change Mas Tempo by holding shift and turning the knob above the cue volume fader...

Quote:

---

Originally Posted by kooper1980

This looks pretty sweet. I sold my APC before coming to Traktor but im pretty sure that with this map i'd be rocking!!! ;)

Nice work man!!

---

thanks homie... i hope someone gets some use out of this besides me :p