Printable View
So I was able to borrow an RMX from a friend for the week and set it up and am just looking for some tips from those who use one. So far it just seems that the effects are extremely overpowering or at the other end of the spectrum.
Any of y'all who use an RMX have any tips.
http://www.youtube.com/watch?v=JLxT8-_lPbw
Ellaskins explanations. Make sure you watch the other parts as well!
And to see how some popular dj's use a rmx-1000:
http://www.youtube.com/watch?v=rfijvN7jr_k
Holy redlining the DJM in the second video. You'd think these professionals would be a little more careful about sound quality.
I just picked up the RMX-1000, it's really great. Very impressed with the sounds you can get out of it. It's much nicer to be "subtle" with it, whereas I find the typical DJM effects are really bold and in your face. You can do that with the RMX as well, but you don't have to.
They are actually below the OVER indicator for most of the mix, not that it matters with the huge headroom though. Also 4 of the indicators above the green level are orange (optimal point is the 3rd orange LED) which is hard to make out in the video.
So what, it's not hard to turn the gain down to make it "green". Red and orange are wrong.Quote:
Originally Posted by makar1
The output from my DJM is actually quite low when everything is in the green. The onboard sound card on my computer is significantly louder when at 100.
I know the DJM has a huge amount of headroom, for exactly this reason, DJ's used to redline the older DJM's and they would sound absolutely horrible (they didn't sound very good to begin with).
I have mine running into my Rane at the moment, running the inputs in the green, the master out needs to be up around +3 dB to basically equal the input gain of a deck into that mixer. At the club, I have almost always had to turn it way way way down from there (going into the amps).
Keeping on track with the RMX-1000... it's also easy to redline that device. If you put it in the effects loop of the DJM-900, you can click the "on/off" button of the effects section on the mixer (going to the external loop), and adjust the input/output knobs of the RMX-1000 so that the level "on" is the same as "off". That way, when you flip it on and off it's imperceptible to the listener. At these levels, you do need to keep the DJM channels in the green, or the level meters on the RMX are pretty much all red.
Again, it's all digital, with headroom, so while I haven't heard it clip or anything, I prefer to keep things in check.
Actually, +4d is optimal for soundquality of djm newer series. (which is like 3 yellow leds). Atleast according to Pioneer!Quote:
Originally Posted by Ryan Ruel
You can play well into the reds without getting distortion..
Sorry but this just simply is not true.Quote:
Originally Posted by Ryan Ruel
Sorry, but you are wrong. Why, would you ever want to run an audio product into the red? Unless you wanted to intentionally distort it?Quote:
Originally Posted by kooper1980
Just because headroom was engineered into the product, it was designed with red lights to indicate to the user, they are doing something incorrect.
And with most mixers, particularly analog mixers, when they hit the red things begin to degrade very quickly.