Printable View
Hello again.
Can be activated by mapping, or another option, the two VU meters of the masters of each channel, to see these in the PFL?
I Akiyama Tempus controller, and Traktor Pro 2.10.1 Original.
The closest thing I've found on the internet about this issue is, but really your explanation does not solve my problem.
https://www.nightclubber.com.ar/foro...-vumetros.html
Thanks again for your help!
Add Out > Mixer > Meters
There you can choose from:
-Master Out Level (Left)
-Master Out Level (Right)
-Master Out Level (Left+Right)
As for the PLF you can find that command under the 'Mixer' group as well:
Add In > Mixer > Monitor Cue
Uhm thanks for your fast reply!
I found these options at Controller Manager, but, you know what values I put in each or how I can active them?
Check out this DJ Techtools tutorial on basic midi mapping! That will help you to figure out what does the 'learn' button do and how you can set different interaction modes and different deck assignments for each of commands in your mapping.
The PFL should be strait forward since you can press the button on the unit to send signal in to Traktor and MIDI Learn it but you can't do a same for VU-meter LED's. I'll see if I can find some of their factory Traktor maps and try extract the information about what CC values they used. (this are usually found in the User Manual as well)
Thank you so much for your reply!
Investigating in your web, and checking one to one all maps, I found this map https://maps.djtechtools.com/mappings/527 from another company, Voxoa, but the model is very similar than my Akiyama Tempus.
I installed the maps and this map fix the problem of vumeters!, but some items works wrong... Im seeing the light thanks to your great site!
Those are the 2 mappings:
config2.10 > works everything well, but not the vu meters problem
VOXOA_C60_for_TK2_(4_Track_Decks) > the map that I found from VOXOA controller... the vu meter works with this map but many things doesnt work (play buttons, cue, etc).
config 2.10.tsi
http://www84.zippyshare.com/v/4VCOkese/file.html
VOXOA_C60_for_TK2_(4_Track_Decks).tsi
http://www84.zippyshare.com/v/pIitlYh9/file.html
Im trying to find the parameter from VOXOA map for add it to the old map...
I looked in both of those mappings and all MIDI notes seems to match 100%... Which means that there shouldn't be a possibility that one function works in first mapping but fails in the other.
Take example of the play button - the MIDI note in this button is C1 (in both mappings) and it's associated with a corresponding channel (Ch01=Deck A, Ch02=Deck B, Ch03=Deck C, Ch04=Deck D)
The VU-Meter assignments are also matching.
Could it be that you use 'ALL PORTS' setting at MIDI in-port and out-port?
Thank you again!
Yes, I use IN PORTS = all ports and OUT PORT = all ports ... In DEVICE TARGET = Focus
This is wrong? What should be the perfect configuration here?
I tried all combinations with NONE, ALL PORTS and TEMPUS, and everything still same :(
The VOXOA mapping works with all combinations too :S