LED output issue - how to fix?

I'm trying to map the LED output of the original VCI-400 EGE DJ TechTools mapping, correctly:
https://maps.djtechtools.com/mappings/911

Yes, it's old, but therefor I used the oldest Traktor I own, Traktor 2.6.7.
And yes, I'm using v1 Firmware, where it's made for.

Nevertheless, out-of-the-box this mapping contains a bug(?) :blink:
I've tried the other mappings for the VCI-400 EGE on maps.djtechtools.com too, but they all behave the same.

LEDs I want to have 'ON' when pushed, but 'OFF' when other button is pushed (so it becomes a switch).

For example:
Push top left button & its LED goes 'ON'.
Push bottom left button & top LED goes 'OFF' & bottom LED goes 'ON' (and viceversa).
This works for left buttons.

But when top left button is selected, and I want the same behavior on the right buttons, it goes wrong;
The LEDs simply stay 'ON', on the right.

See video:
https://youtu.be/cniUyNajiVE


When left bottom LED is 'ON'/selected, the right LEDs do behave as they should.

What is going wrong here?

IF LEFT top button = M5-0 is active....
RIGHT top button = M5-0
RIGHT bottom button = M5-1
= wrong

IF LEFT bottom button = M5-2 is active...
RIGHT top button = M5-2;
RIGHT bottom button = M5-3;
= OK

My head explodes. :cursing:
How to solve this?

http://i67.tinypic.com/ofawlf.png


Attached the MIDI values in a TSI mapping:
Attachment 28605

Quote:

---

Originally Posted by bascurtiz

I'm trying to map the LED output of the original VCI-400 EGE DJ TechTools mapping, correctly:
https://maps.djtechtools.com/mappings/911

Yes, it's old, but therefor I used the oldest Traktor I own, Traktor 2.6.7.
And yes, I'm using v1 Firmware, where it's made for.

Nevertheless, out-of-the-box this mapping contains a bug(?) :blink:
I've tried the other mappings for the VCI-400 EGE on maps.djtechtools.com too, but they all behave the same.

LEDs I want to have 'ON' when pushed, but 'OFF' when other button is pushed (so it becomes a switch).

For example:
Push top left button & its LED goes 'ON'.
Push bottom left button & top LED goes 'OFF' & bottom LED goes 'ON' (and viceversa).
This works for left buttons.

But when top left button is selected, and I want the same behavior on the right buttons, it goes wrong;
The LEDs simply stay 'ON', on the right.

See video:
https://youtu.be/cniUyNajiVE


When left bottom LED is 'ON'/selected, the right LEDs do behave as they should.

What is going wrong here?

IF LEFT top button = M5-0 is active....
RIGHT top button = M5-0
RIGHT bottom button = M5-1
= wrong

IF LEFT bottom button = M5-2 is active...
RIGHT top button = M5-2;
RIGHT bottom button = M5-3;
= OK

My head explodes. :cursing:
How to solve this?

http://i67.tinypic.com/ofawlf.png


Attached the MIDI values in a TSI mapping:
Attachment 28605

---

Hey Bas,
I am not familiar with original mappings for VCI-400 EGE but we should be able to sort this out.

I looked into your TSI and it looks like you are using one modifier for four buttons. Are you trying to create four banks of controls or do you want two banks on the left which are independend from second two banks that are on the right side upper-corner?

Cheers,

Quote:

---

Originally Posted by Stewe

Hey Bas,
I am not familiar with original mappings for VCI-400 EGE but we should be able to sort this out.

I looked into your TSI and it looks like you are using one modifier for four buttons. Are you trying to create four banks of controls or do you want two banks on the left which are independend from second two banks that are on the right side upper-corner?

Cheers,

---

I found the issue:
Like you had your question-mark too... 1 modifier for 4 buttons....
That's how it originally is mapped by DJTechtools.

And this is where it goes wrong.

I've looked into Flashflooder's 2.5 mapping (though made for Firmware v2) and he's using 2 modifiers to make it work correctly: https://maps.djtechtools.com/mappings/166/

I've now deleted the original mappings for these buttons and replaced them with the ones in Flasflooder's, and now it works, see video:
https://youtu.be/trhA4r7AIAE

Attached the working TSI mapping.
Attachment 28606

That prolly does need a whole lot of remapping functionality-wise (reverting the 4 encoders/buttons as they are shown natively in Traktor + FX-settings wise) but atleast we got this tackled.

Glad to hear that the issues with modifiers are solved! Let me know if you need any further assistance with this mapping.