i tried looking...but have not seen a mapping for the mixdeck quad..do you have any suggestions??
Printable View
i tried looking...but have not seen a mapping for the mixdeck quad..do you have any suggestions??
Actually, found a way for fixing almost all of the problems, but still don't know how to create that some kind of superfader which I explained in the previous post.Quote:
Originally Posted by Stewe
@salsero316 Found one, not sure will it work for you: http://traktorbible.com/freaks/mappingview.aspx?id=405
Do you have some basic knowledge how to create a mapping?Quote:
Originally Posted by salsero316
[QUOTE=Stewe;523304]Do you have some basic knowledge how to create a mapping?[/QUOT
i have a little bit of knowledge on mapping..i get confuse on certain parts..gonna name a few...the fx,the the led screen on my quad and the loops and hot cues.
Think you can create image with diagram of midi controls? Note and CC. I don't have that controller but I could make you simple 4 deck mapping if I have all those codes and then upload it here so you can test it out.Quote:
Originally Posted by salsero316
if you can..i would really appreciate it!! :)Quote:
Originally Posted by Stewe
Nice! If you are about to create a diagram make sure you use good resolution pic. Also make sure to double check all codes before uploading.Quote:
Originally Posted by salsero316
Cheers
Wow what an amazing thread, thanks for all the great tips!
hi do you know how to map a bcd3000 to traktor pro, everything works apart from the sound fx and browsing using the jog wheels.
Can't believe somebody else on this forum still uses it... Except of me ofc ;)Quote:
Originally Posted by perryp35
Double deck focus: http://www.traktorbible.com/freaks/m...ew.aspx?id=429
Four deck with fader FX: http://www.traktorbible.com/freaks/m...ew.aspx?id=206
thanks I havent a clue how to do it all but never mind I`ll find someone!!!
With mappings I linked you can do both, browsing with jogwheels and full control over four FX units you can check it out. It is other thing if you want to learn how to map it by yourself?
As some of you might know settin toggling modifier to fader will not work with same settings that are used when mapping it to button. We need to use trick there ;)
http://www.youtube.com/watch?v=3oy4lxBrB2I
that's cool, but what would you use it for?! :blink:Quote:
Originally Posted by Stewe
For smart fader. With toggling modifier 0-1 each time knob is moved from start=0 I have modifier conditions for two sets of combo effects on single knob/fader. I got this idea after reading thread in general discussion about returning to previous set of effects after using a smart knob. You can use one button to bring old preset of effects or map it on fader/knob so it can load those next time it's turned from start.Quote:
Originally Posted by BradCee
ah, so just lazy macro effects? real djs use more than one knob/fader!! :p
Not just that but it's what is meant for. I can line up eight values before reseting and map eight hotcues or samples with various effects depends on each modifier state increment. From there I can engage some jog FX as well or give that ModCon to some other buttons or faders. Real DJ's could use more knobs like we bedroom DJ's ;)
too true sir, too true
since getting my contours though my crazy mapping days are behind me, i think it's cos i don't to force them to do more than designed for...
Self-deleting hotcue in Traktor:
http://www.youtube.com/watch?v=M4Oa9D2V0UA
haha nice, this came up before when i asked if we can delete the hotcue with the same button as the hotcue button. this as a draw back is that to delete it you have to press/hold the button for the modifier to count up then delete.Quote:
Originally Posted by Stewe
well it jumps back to the hotcue part, which u dont want to if you're already at somewhere else in the song. but i do like the idea.
Yea man, I thought to share it here :)Quote:
Originally Posted by Kensic
I'm pretty sure that in my video it doesn't jump back to hotcue after deletion.
Cheers for this idea ;)
no it jumps right when u press/hold the button.Quote:
Originally Posted by Stewe
for example... I'm almost the end of the song, and beginning to cue in the next song. so i just want to delete hotcue #2 (located near the beginning of the song) for the heck of it. so i press and hold the button *it jumps to hotcue #2* then i hit myself in the head...."CRAP! i just want to delete it, and now i just messed up my mix" lol
Oh, I thought you wanted one auto deleting hotcue for cue juggle on the fly and deleting it short after that so you can eventually use it again in same track but for different part of song, vocal or whatever. This way you need to think ahead and the last time you use this hotcue you actually hold it so it can be deleted. For what you want to achieve you need one shift button that can tell that hotcue not to jump while shift is on hold but that could be out of point because you regular use shift anyway for deleting some hotcues.Quote:
Originally Posted by Kensic
now you're speaking my language. yea the idea was awesome....but not practical in real life situation.
yea i just moved on from that idea and use the traditional shift button delete motion.....i my mind....I HATE USING SHIFT BUTTONS...i avoid shift buttons....just because sometimes i need both of my hands
One hand shifting is easy for me, I have long fingers ;)Quote:
Originally Posted by Kensic
Can someone help me with my Traktor mapping ? I have an Numark Total Control, and an Akai LPD8. I mapped the pad to work with Traktor, but I couldn't use both pad and controller together. I have the tsi file for both, But I don't know how to put them together in Traktor. What I want to say is that or I use the controller, or the pad, I can't work them together. Can someone help me ?
Instal Numark tsi from big Import button (bottom screen) and for second tsi use Add button from device menu. When you set things right, use Export buton to save both mappings in to one tsi for further reference.
I need to do that with BOTH plugged ?
And how I select the controller AND the pad in the global settings ( the button the the right of the little import botton ) ?
And I need to export the tsi file, and import it again ?
Both tsi files won't clash ??
By the way, thanks for the help
It doesn't matter if it's plugged or not from my experience with bcd. Just follow those steps it told you and make sure that midi In and Out ports are not set to "all controllers" instead you need to set it to controller that's corresponding to mapping you are importing. Import numark mapping > set numark as In/Out and vice versa for akai mapping.
Both tsi files should not clash since they come in different Generic devices, other words, It won't in-write into existing mapping and rather it will be in separate generic device which are working simultaneously.
One thing that counts are midi channels and there are 16 midi channels. With every of this channels traktor can communicate independently which means that it can be plugged up to 16 controllers total if every of it is mapped in different midi channel. Point is to make sure your mappings aren't mapped in same midi channel because if those controllers are sharing some of midi massages there could be conflicts and you should re-map akai in that case.
Attachment 12867
Is it possible to map the 4 pages of 8 buttons ("slicer" "cues" "gratify" and "Grid" on the picture) without using a modifer, or just one.
It requires one modifier with four values:
4 bank settings: http://forum.djtechtools.com/showthread.php?t=55271
I gave example with modifier #1 but you can pick any other. Just make sure every of modes got corresponding modifier conditions dedicated.
slicer - M1=1
grats - M1=2
cue - M1=3
grid - M1=4
Attachment 12868
is it possible to map the 8 buttons to behave as pages, either being cues, gratify effects, grid effects and slicer effect, while only using a single modifier. the pages also need to affect either deck a or deck c on the left and deck b and d on the left. cheers, sorry for the big first question
I suggest you to make yourself a big cop of coffee and start adding modifiers from link I posted :)
Once you have those pages/banks working you can map all those features from VCI performance mode.
Stewe, you are on the ball with all this stuff. :D many thanks bro. The part i am currently having trouble with is the having toggle-able pages. if i have to duplicate modifiers on the same button to create a toggle (e.g.: the first - value = 0 modifier conditions m1=1, the second value = 1 modifier conditions m1= 0 ), how do i interwine two or four modifer values so only one modifier value is selectable at a time. Current issues i have are all led enabled modifiers just come on and stay on, all turn on or off together, etc. cheers
First button - M1=1
-Duplicate it and set modifier conditions to be M1=1, mode-direct and value-0. This way when first bank is active modifier's value is 1 and because you dedicate condition of M1=1 next time you press the same button lLED will go off and bank should become disengaged. Now repeat this same step to rest of banks by using different modifier conditions that are mapped to each of the buttons.
Other way to do it and more simple one is to map another spare button to M1=0 and by pressing it modifier should go to zero and turn off any of banks which is currently active.
noob here, how do i map buttons to switch between a/c & b/d?
specifically, i am failing to make this 4 deck http://maps.djtechtools.com/mappings/513
i have tried to duplicate the first 2 decks and edit device targets in hopes it would magically work but i am lost tbh
To map Flux mode follow this steps to add command at Assignment Table from Controller manager:
Add in > Deck Common > Flux Mode On / enable learn / press desired button / disable learn
-type of controller - Button
-interaction mode - Toggle
-make deck assignment
Add out (LED) > Deck Common > Flux Mode On > repeat learning process
-type of controller - LED
-interaction mode - Output
-controller range - first slot=0 ; second slot=1
-make deck assignment
Hi! I need help... how can i map the novation launchpad right buttons with the master output meter to make a cool effect with the music playing?
Tweaking controller range for monitor level LED output should do the trick.Quote:
Originally Posted by fuzzywussti
From down to up:
-Button 1 / 0.000 - 0.050
-Button 2 / 0.000 - 0.120
-Button 3 / 0.000 - 0.350
-Button 4 / 0.000 - 0.480
-Button 5 / 0.000 - 0.680
-Button 6 / 0.000 - 0.760
-Button 7 / 0.000 - 0.875
-Button 8 / 0.000 - 0.970