Is there no one with a SE who can tell me their experiences?
Printable View
Is there no one with a SE who can tell me their experiences?
because we are splitting a knob in half to create the effect, the distance between 94 and 100 is quite small and in some rare cases it might not go all teh way to 100. Usually it does but any time it does not just moving the knob has always fixed it for me.Quote:
Originally Posted by rjw
Quote:
Originally Posted by Flaekiface
in the case of the filter, yes- the knob turns it to 100% and turns the effect on.
so all you have to do is hit the button to select the effect and reset the parameters and then work with the frequency knob.
So alot of posts in this thread got deletet. I will try again.
I have updated to Traktor 3.4.1 and am still having problems with the effects.
I discoverede that engaging an effect (pushing the effect button) after using the filter, sometimes turns the effect "on" and sometimes you need to activate the amount knob to turn it "on".
Does this happen to any of you guys???
I use the VCI-100SE_Ean_Golden1_2.tks
I don't know if this helps, but this is what I've discovered using tks v1.3 TT-Style:
- at startup all works great, the filter button sets filter with correct parameters values: when filter knob is in center position amt is 0% and when I move that knob amt changes to 100% and engages filter moving its parameters. If, for example, now I push effect echo button the amt for echo is 0% and when I move its knobs I engage echo fx.
- If I engage deck c mode and I press filter button, the amt isn't 0% as before when the filter knob is in center position but it remains always at 100%... Now if I push one of the other effects buttons, for example echo, the amt remains at 100% and echo starts immediately...
So, I think it's a tks problem: it seems that the page#2 of tks isn't configured properly... I'll try to check this evening...
I hope you understand...
P.S. I use the correct procedure to engage effects and filters: 1) push button 2) move knobs 3) move amt knob to 0% 4) push another fx button... and so on...
Thanks for the input.Quote:
Originally Posted by fcarsana
What you experience in deck C mode, I experience all the time - filter amount knob is always 100% in my setup, which i my case means that hitting an effect after the filter, turns on the effect emidiatly. :(
Not only in deck c mode, but in all performance modes....Quote:
Originally Posted by Flaekiface
I'll try to investigate...
I find that quite often too, example, I'll do some filterstuff - then when I hit the beat repeat button to switch to that effect, it'll engage the effect! by which I mean the mix setting is not at 0% - leading to a drop out in sound.Quote:
Originally Posted by Flaekiface
The problem with this is that I can't solve it by turning down the mix/frz knob down to 0% before hitting the FX button as it moves the filter!
Kinda hard to explain :o
I've worked hard for about 4 hours and I think I've solved the problem! ;)
This tks is derived from tks 1.3TT, I've only added some notes on effect button 1 and effect knob 1...
Tell me if it works for you!
Woooha! This has fixed the problem for me! Also works in all the performance modes. Fantastic work fcarsana, thank you very much. :DQuote:
Originally Posted by fcarsana
The reason why this works is that it resets the amount knob to 0% whenever the filter knob is at 12 o'clock. This means that engaging an effect efter using the filter, dosent turn the effect on, since the amount knob is kept a 0%.
This must be a genral bug-fix, that needs to be incoorporated in the official tks files, imo.
But tell me, have you touched anything else in the tks file other than the effect fix. I would just hate to run into any unpleasent surprises ;)
Now I just need to get the outside of the jogs to work like they do in the 1.2 tks.