The Ultimate FX Thread

Anyone else not getting sound in Stewe's video?

No sound. I didn't do anything musically so I didn't record it. Just bank switching as title says.

Ahhh! Got it. Thanks.

Quote:

---

Originally Posted by Stewe

This is an effect that Dubfire uses a lot. I think it pretty cool for making transitions between tracks or for spicing up tracks on the fly.

http://www.youtube.com/watch?v=b0N0C...ature=youtu.be

Make sure to set FX Unit in to single effect mode

Button 1:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.500

Button 2:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.650

Button 3:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.800

Button 4:
Unit On = hold
Button 2 = 0
Button 3 = 1
D/W = 0.550
Knob 1 = 0.700
Knob 2 = 0.350
Knob 3 = 0.950

---

just wanted to add that using this effect on vocal loops running off the remix decks while playing minimal techno is freaking brilliant.

Quote:

---

Originally Posted by Stewe

I did play with this effects combination but as instant button effects. Definitely suit great for techno.

---

I happen to currently be looking for exactly that, instant button effects for techno. Did you post these anywhere?

thanks

Quote:

---

Originally Posted by MWagner

just wanted to add that using this effect on vocal loops running off the remix decks while playing minimal techno is freaking brilliant.

---

I'v added a bit of reverb here. Kick it in on ramp triggers. More space.

Quote:

---

Originally Posted by MWagner

I happen to currently be looking for exactly that, instant button effects for techno. Did you post these anywhere?

thanks

---

Can you link the post?

Quote:

---

Originally Posted by Stewe

I'v added a bit of reverb here. Kick it in on ramp triggers. More space.



Can you link the post?

---

post 117

it was your response to this post:

Quote:

---

Originally Posted by jthightower45

Did some experimenting w/ Beatmasher 2 / LaserSlicer / Strrretch (slow) - All on the same FX unit in group mode.
LaserSlicer and Strrreth are both new marco FX in TP2.6.

D/W set at 100% (direct-hold)
Beatmasher w/ (4) buttons each launching parameter values at 50%, 70% 90%, & 100% (Hold-on)
LaserSlicer w/ a Fader controlling 50-0% of parameter value (inverted control)
Strrretch w/ a fader controlling 50-100% of paramerter value.
Faders have to be in realitve mode w/ sensitivity @70% and accelertion @0%
(1) Button (hold-on) to turn on both MacroFX. **Note MacroFX are not active if paramter value is at 50%.
Start w/ faders are all the way down and set LaserSlicer and Strretch at parameter value 50% initially before controlling.

Map it real quick and check it out. With the long range of a fader you can create some wicked sounds, machine like, can't really explain it but crazy.

Use the beatmasher at 90% then 100% to repeat a beat and build back into your track or just before a drop as you get close to 50% w/ MacroFX.

Quick vid Stewe? :D

---

Nope. I didn't post that. Just saying it is interesting combo to use for techno.

I'd also like to see what others can come up with or to hear what combos you think are worth experimenting with certain music genre.

Here's tutorial how to use modifier for the supercombos. The Beatmash combo parameters in this thread are actually applying only to one direction left>right but this modifier concept can improve that.

Pick four buttons.

Add a modifier / type=button / interaction=inc

http://i.imgur.com/7qkDQQP.jpg

Duplicate three times and assign commands to selected four buttons. Should look like this:

http://i.imgur.com/kL0GBJR.jpg

Now press and hold all four buttons and check modifier state display. Notice that your modifier state says value 4 (as in pic^) and that's because every button is programmed only to increase value by one no matter in which order or direction you're pressing buttons.

But,

When you release the buttons modifier value will got stuck at 4... And we want it to be 0 in order to use this combo again. This is how we do it:

Add a modifier / type=button / check invert.

http://i.imgur.com/gPkSxTD.jpg

Change interaction mode to direct and set value to 0.

http://i.imgur.com/lB8Rx7n.jpg

Now duplicate this Invert 0 command and map to all buttons. Value should switch to 0 right on release.

Time to test ;)

Quote:

---

Originally Posted by Stewe

Now duplicate this Invert 0 command and map to all buttons. Value should switch to 0 right on release.

Time to test ;)

---

Wow... Thats pretty clever... :)