Hey is anyone using Xone DX with Traktor?
If so have you had any luck with using the mic?
I get NO MIC SOUND from the Front Mic Input. Not sure whats going on but, perhaps the mic only works while using ITCH?
Anyone?
Printable View
Hey is anyone using Xone DX with Traktor?
If so have you had any luck with using the mic?
I get NO MIC SOUND from the Front Mic Input. Not sure whats going on but, perhaps the mic only works while using ITCH?
Anyone?
Hey thictool, Yeah I've used the mic a couple of times with traktor and it works fine. Only used it on my laptop though and not my pc which I'm on just now. Have you setup the inputs? (I can't remember the channels, but think its 7&8). And whatever deck you have it set to is it on the audio through? I've had no issues with mine and actually had a good laugh running the effects over my voice.Quote:
Originally Posted by thictool
I will check my settings on the laptop and let you know.
Ok I got it....Ive never ran a mic through traktor so I have to start this proccess as a newbie....But got it figured out....
Main thing was to figure out that the channel in Traktor (A-B-C-D which ever one you decide to use) was set to External.
Update now available to fix the right jog wheel slip.
http://www.xone.co.uk/forum/forum_po...?TID=3505&PN=1
thanks for the link.
I've received the coloured knobs from Djs Face so now my unit as a related colored faders to the deck's colour (red and green) and orange knobs for the fx knobs (I'll post a picture later).
I've been a bit disappointed by the knobs to be honest as they're supposed to fit but in fact they don't... the hole is not deep enough and the black adapter that comes with them rest on the metallic part of the shaft so they're way too elevated. I had to dig the hole, remove the black adapter and then use some milliput ( a two part paste that strengthens when dry) to mould the interior of the hole so it fits the shaft... meh....
One thing I really miss on the DX is the fact that the jogwheel isn't sensitive.
I'm using the jog wheel to manage fx parameters and not having a note on when touched is a serious lack. Well, I managed to do almost what I wanted but still that would have been a nice addition.
Apart from that, the unit rocks.
By the way I hate NI to not allow us to have a better management system of the mapping. Once a deck is mapped I have to duplicate the deck 3 times for the 3 others decks, change each line one by one....and it's a pain in the ass.
Any chance someone knows a simpler (and free) way to do that (duplicate the file and change the midi channel...)?
Hey Hesitant....THANKS FOR THE UPDATE BRO !!!!!!!!!!! The Jogs act exactly as they should.
Here some shots of my new Xone DX
My only beef with this unit is its complete in-ability to be seen in the dark.
Even with a UV light, the buttons are impossible to see. And the LEDs are located beside (?) the buttons (instead of on top or beneath) so finding them can be troublesum.
And hell some buttons dont even have LEDs for some unknown and ridiculous reason that problably has SERATO's name written all over it...
So I went to Staples and went sticker crazy.
I also used some Green Knobs and Faders I got from DJTT. Remember that the Black strip on the Green Knobs from DJTT will most certainly fall off at some point - I super glued mine, and I would suggest everyone do this because the Black strips are soooo small. Ive lost a couple in dark rooms never to be found again. Also the Green Knobs have a square peice in the bottom of them that allows you to change the position of where the Black strip sits. So the virtually work for any unit.
Also I removed the crossfader which was as easy as unscrewing 8 srews and lifting the top up about 4 inches. You dont even have to take off the knobs and faders to do this. This thing is really interesting inside. Well built and seemingly lots of room for Mods.
Even with the complaints I have about this unit....Its bad ass...and blows away anything in the market to date. You truely have to feel & hear one to believe it.
here are some freshly baked .tsi for anyone interested...
http://www.mixarchitekt.com/teknik/m...p125v4-tsi.zip
new documentation will be coming soon, but you'll find most of what you need to know if you check the previous doc - here
the new stuff is as follows:
3 flavors of effect control
1. 1 fx per deck/layer
2. 2 fx per side
3. 2 fx only
master tempo adjust via shift+scroll
master tempo pitch bend via shift + < and > buttons
key adjust via shift + pitch
hot cue led's are now active... for cid k.
yay.
Thanks very much Tim. Appreciated.
mmh, something's weird.
Could someone check the following: map a button to toggle key on/off for a given deck.
Play that deck and adjust the pitch to any value apart from 0.
Toggle off and then toggle on, my key 'knob' on Traktor drifts to the left or right by a value related to the pitch
Why? Why? Why?
I have nothing mapped (nothing active) that relates to Key apart from this button. I just don't understand AT ALL. The same behaviour happens even if I use another button on a different midi channel.
Is this a Traktor flaw. Any clue? Am I the only one? Is a default in Traktor 125 that I'm not aware of (if it's a known bug sorry for asking).
that's how key lock works - it corrects the key according to the playback pitch. when it's engaged, it tries to maintain the native/original key of the track, which is an offset of any pitch adjustment you've made for beat matching/sync.
i didn't think much of it before the other night, since i usually don't have the key/filter knobs displayed in the gui. then i mapped a button for key on/off and the pitch control on a modifier for key adjust, and saw what you are describing. but it makes sense... traktor will display the key adjustment separate from the key knob if you have it selected in the deck gui...