You can use modifier 3 for right side jog FX. Just set it up exactly as you did with modifier 8.Quote:
Originally Posted by oriyong
Printable View
You can use modifier 3 for right side jog FX. Just set it up exactly as you did with modifier 8.Quote:
Originally Posted by oriyong
Attachment 9921
Done here :thumbup:
I did some testing. You need to make a little adduce to modifiers 8 and 3. In both of those blank modifier conditions slots (from quote) set in:Quote:
Originally Posted by Stewe
For M8: M4=1
For M3: M5=1
Attachment 9931Attachment 9930
Done! ;)
Nice,
Now lets deal with blinking led indicator for Jog FX. Follow this path: Add Out > Output > Beat Phase Monitor.
Since this is four deck mapping you will add decks A and C beat to modifier 6 button and decks B and D to modifier 7 button.
Beat phase monitor:
Modifier conditions: M6=1
Assignment: Deck A
Controller range: -0.5 ; 0.5 (check blend box)
Modifier conditions: M6=1
Assignment: Deck C
Controller range: -0.5 ; 0.5 (check blend box)
Attachment 9933
done but not blinking in filter button or should we deal with the stock map filter first?
I have attached you the current mapping here
Attachment 9934
Find /filter on/ OUT in your mapping and set modifiers:
A and C: M6=0
B and D: M7=0
Not sure this can help but worth trying it...
tried it. it wont blink and lit when turn jog fx on. but in normal mode i it lit when press on/off
Tried to remove blend?
it lit but not blinkQuote:
Originally Posted by Stewe