Printable View
As some of you know, I purchased a pair of KRK monitors when they are on sale. I did this on a "buy first (on insane deal), ask later" moment.
Now they should arrive tomorrow.
Question: How do I hook these up if I have an audio 2 (I have a splitter to make the master out into 2 TRS outs)?
Would i need to upgrade to the Audio 4 for easier use?
Your thoughts?
Thanks!
Audio 4 is marginally simpler as you can get two mono RCA cables and be done. Still not worth the upgrade imo.
While the Audio 2 ships with phone plug to stereo RCA cables, these are probably unusable/too short (I'm saying probably since I don't own an Audio 2). I would get a real short 1/4" phone plug (male) to stereo RCA (female) adapter and then two mono RCA cables (male-to-male). If you need the lowest price, I suggest ordering these cables from monoprice.com.
right channel to right speaker
left channel to left speaker
if they have a TRS input then use a single RCA cable coming out of your Audio 2 and buy an RCA to TRS adapter. No splitter needed.
Easy as pie.
rly? ;)Quote:
Originally Posted by haze324
Most KRK speakers have separate RCA (unbalanced) and TRS (balanced) inputs. The Audio 2 outputs an unbalanced line-level signal. Hence one should use the unbalanced input of the KRKs to hook up the Audio 2. That's why I like my suggestion better than yours. DJTT's featured a related article some time ago.Quote:
if they have a TRS input then use a single RCA cable coming out of your Audio 2 and buy an RCA to TRS adapter. No splitter needed.
i think you advised him to use a 1/4 inch plug to RCA.
1 mono RCA into a RCA to TRS adapter into each speaker.
I'm pretty sure I said the same thing.
I really think splitting hairs on small system makes too little of a difference in sound quality.
No, you advised him to use the TRS inputs on the speakers. I advised him to use the RCA inputs on the speakers.Quote:
Originally Posted by haze324
My suggestion amounts to going from unbalanced output --> unbalanced input. Your suggestion amounts to going from unbalanced output --> balanced input.
It is different.
I recommend this article and that article on DJTT.
Soooooooooooo just to clarify The outs are TRS unbalanced.
Question though.
I originally got the splitter to let me broadcast on ustream (1 would go to my speaker (makie TH 15) and the other would go to my audio-in on my mac) however, i still needed to set my output on traktor to mono so it wouldnt sound like hell breaking loose....even though it was split....
your thoughts?
also. Is there a way to manually set my audio 2 to mono/stereo if i want to use it with ableton (thereby letting me use the monitors for ableton)?
The Audio2 outputs are not TRS in the typical meaning of that term. TRS is used to refer to a balanced connection on a 1/4" jack using the Tip, Ring, and Sleeve.Quote:
Originally Posted by Gianmarco
The Audio2 outputs are 1/4" phone plug stereo.
Get one of these adapters: http://goo.gl/714mQ
And the appropriate length RCA cable: http://goo.gl/dot17
Get one labeled "premium". These are made with shielded coax. They are bonded together but you can easily pull the two cables apart to run one to each speaker.
i got the issue resolved a few hours ago. picked up a trs to 2 mono (black/tip and red/ring) along with some trs to trs to connect to the krks
SOOOO BEAUTIFUL!!!!
Did you get your KRK's already? Nice. I'm hoping they don't screw up my order.
yeah, it sounds like the music is being produced live in front of me!Quote:
Originally Posted by GlobalFlier
SO CLEAN!!!!!!
pic in gear thread if u want so see.