Printable View
Currently using the RCA's that come with serato for my audio 8 and was looking to get some better RCA's maybe MONSTER...or do they have one cable with 8 rcas on each side (like a multicore cable)
Since I have a DJM 800 looking to turn my phono inputs into line inputs saw this: http://www.mcmelectronics.com/produc...5Fid=50%2D7240
anyone have any other recommendations for a phono to line convertor :D
& last is it possible to convert a mic input to a line?
Monster cables are the biggest rip off in the audio world. Why not just use the standard NI multicores? I doubt you'll notice any difference. Also, out of interest, why do you want to convert the phonos to lines?
The phono-line converter is a good idea if you havnt got enough line ins on the desk.
But as for the cables, just spend your money on some more tunes, you wont notice any difference with new cables.
i dont use timecode anymore...now running (2) X1's instead and sometimes if i have to run any extra inputs (ex. a friend using another setup i would just flip the switch when its my turn to go on)Quote:
Originally Posted by fullenglishpint
but is it possible to turn a mic into line? (so i can have 4 traktor decks & use the mic channel to run maschine sounds thru and that way i can still cue up all my tracks)
1. +1 on fancy audio cables being a scam. I'm an old audiophile nerd and can tell you in a double blind test, you can't tell the difference between $12 zipcord and $1000 crystal/silver bullshit.
2. if you want good sound you don't want to convert line to phono or vice versa because of the riaa equalization. Vinyl is recorded with the lows cut and the highs boosted so that the grooves in the record give better performance. then the reverse eq curve is applied in your preamp.
3. Yes, it is possible to convert a mic level to a line level and vice vera. mic and line are the same electrical signal, but mic is a much lower level. also one or the other may be balanced or unbalanced depending on your system. a decent converter will not degrade the signal at all.
what do yous think of this cable: [ame="http://www.amazon.com/Hosa-CRA802-8-Channel-RCA-Snake/dp/B000068O1S"]Amazon.com: Hosa CRA802 8-Channel RCA To RCA Snake 6.5 Ft: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/31Q7NIjQyyL.@@AMEPARAM@@31Q7NIjQyyL[/ame]
to connect my souncard to mixer..just one big cable?
Hosa is an excellent cable company and I have a couple of their snakes. At that price, it's a no brainer. I have some $100+ snakes, and when one connection goes bad, its a bummer to have them all tied together.
thanks for the feedback do you think they make any smaller ones 6ft is kinda big...or does any other companies make smaller ones :DQuote:
Originally Posted by sardu
I made one myself just like the above. Works great and easy to set up.
ya last night i electrical taped 4 pairs of RCA's so thats my DIY version for now but thinking of getting this cable
great place for cables of all kinds: markertek.com
they will custom make any cable combo you need if it isn't in stock or you want a custom config.
DI boxes will convert line level into mic level.
I presume passive one will be ok for your application but mine are active.
+1 on Sardus comment about cable makes no acoustic difference . might make you feel smug, but that is all.
Learn some soldering and make up your own cables. Its a handy skill
you mean my mic channel into line level?Quote:
Originally Posted by djrosco
if so, can you recommend any good ones?
A DI will convert your line level output to mic level. Check this for details http://www.astralsound.com/di-boxes.htm
I use a pair of BSS AR133s to run my mixer into a sounddesk.
I have had a couple of Whirlwind DIs and they where good too.
It all depends on budget
Just buy cheaper cables and multiple sets for the shows so you always prepared.
always do that haha i carry bags with me normallyQuote:
Originally Posted by ksandvik
backpack with basic stuff: macbook,audio 8, (2) X1s, maschine, usb hub and appropriate cables for all the above
then a small duffle bag: with duplicates of everything, audio adapters, extra xlrs, 1/4 inch cables basically always got spare for everything