STR8UPDREW Send Monitor State PC Fix - Max Patch NEW LINKS 2012

The original link for this is on Megaupload and they've changed their policy to only allow downloads if u've uploaded it yourself, luckily i've had it on multiple machines and so i thought i'd upload it to a few sites that will still allow downloads:

Oron: Download File - 2.1 Mb
Depositfiles: http://depositfiles.com/files/xhupv0gut
Easybytes: Final Beta.rar - 2.1 MB

File is called Final Beta.rar it is a standalone Max Patch so just unrar and open folder then run Final Beta.exe

Please feel free to post these links around on other forums you think will be useful and post here if any of them get deleted as 30 days of inactivity might get them deleted hence 3 sites.

Peace world hope this helps someone

is this still needed? i thought the issue was pre tp2 with slow devices like the launchpad not being able to process the data fast enough which caused traktor to glitch the audio. i didn't think tp2 had the issue.

i'm still using it for my apc40 otherwise i get the glitch so i believe yes

I got the glitch and the only method for me to get it to go away was a full window 7 reinstall. Annoying but it worked. I'm glad to see there is a real fix up. I'll keep it just in case. Thanks for the effort put into this!

Is it possible for someone to upload once more these files? All links are unfortunately down.. I would really appreciate it : )

Quote:

---

Originally Posted by Piro

Is it possible for someone to upload once more these files? All links are unfortunately down.. I would really appreciate it : )

---

will do 2moro

http://depositfiles.com/files/xhupv0gut is still working

click under the rev counter for free download

i wast trying yesterday and wasnt working, today is, all in all thanks : )

Sweet good to hear.

I can also confirm that this is still needed with Traktor 2.5.0 and an APC40 with Send Monitor State In's set, glitchy, glitchy, glitchy, glitch. woohoo

I unfortunately/fortunately know, its my setup ; ) . Now just fighting with translating *.tsi from 2.1.x to 2.5.0. Does it also helps with sending midi clock to another computer from Traktors midi-out to another?

Quote:

---

Originally Posted by Piro

I unfortunately/fortunately know, its my setup ; ) . Now just fighting with translating *.tsi from 2.1.x to 2.5.0. Does it also helps with sending midi clock to another computer from Traktors midi-out to another?

---

I don't know the answer to that but are you using rtpMIDI? that's what i've used b4 and works over LAN which is ridiculously fast compared to what you need for midi clock and it worked great.

also have you setup the midi clock correctly... you need a Preset called Clock in the controller manager and then either Midi Clock In or a Midi Clock Out on each computer. I've taken to adding both just in case you want to swap them around, also it's important to remember the midi Clock Play button is on on your Sending PC only not both.

i'm not trying to patronise you here i'm just preventing having to type all that anyway.

Peace dude.

my apc40 mapping for 2.5.0 is here if you have one of those: (no clock in it though)
http://forum.djtechtools.com/showthread.php?t=53026

The links are down again. I was looking forward to using your mappings but sadly I must wait.

i just clicked the deposit files one it's still working have fun... it has broken slightly for 2.5.1 but it is only the skip on the preview deck that is affected as far as i know will upload a clean one soon

Quote:

---

Originally Posted by nonspacial

i just clicked the deposit files one it's still working have fun... it has broken slightly for 2.5.1 but it is only the skip on the preview deck that is affected as far as i know will upload a clean one soon

---

Heres the error I'm getting: http://puu.sh/WqDK

Depositfiles: http://depositfiles.com/files/xhupv0gut

Still getting the same error. Can you upload it some where else?

+1! Desperately trying to dl this...

-edit- if you read you will find

I would bother to upload this again if ever i clicked the link and it was down, but every time i click i get the download page just fine. there must be something wrong with your browser or your isp are blocking the site. try using a different browser (firefox is what i'm using) and if after chrome, firefox, opera, iexplorer and safari all fail then try looking into the Tor Network to stop ISP blocks, but do that at your peril... if you only access that 1 site and get the download you should be relatively safe, but do not take my word for it, do your research first

fyi i just tried to download as a test. after waiting for the countdown thingy to complete i get this message:

"The file does not exist, access is limited or has been removed due to copyright infringement"

edit: msg would have been auto translated by chrome i presume...

ok no worries, apologies; new download link will be up soon, it's not on this computer

i need this fix why is every link ive ever seen for this down ...:confused:

Quote:

---

Originally Posted by Andrew Spoon

i need this fix why is every link ive ever seen for this down ...:confused:

---

Sorry dude i actually forgot get there quick :) peace


http://depositfiles.com/files/zp9iz9sd3

thank you for sharing the download links.

can anyone email this to me? None of the links above are working, I will gladly host it on my server for download for all so nobody has to go through these freebie sites to get the download, thanks! tnacrew at gmail dotcom

bump, anyone?

None of the links are working :(

Can someone please share a working link?

The best solution would be that someone just puts it in their Dropbox and shares the public link (or something similar to that). That way the file doesn't get deleted and the links just work. Or I could also host it on my own server if necessary. I just need the file, that's all :)

So I found the program packed into a rar file from someone's APC mapping on Traktorbible. I've extracted the rar, archived the program again and uploaded it to my Dropbox. So if anyone needs it, here's the link:

http://goo.gl/7ojO6

But now I have another problem, I'm familiar with Midi Yoke and I've used it a lot to fiddle around with my Nexus 7 and OSCpad, so I sort of know how this stuff works. But I can't seem to get this program to work.

This is how it's set up in the program:

https://dl.dropbox.com/u/7776728/smsfix.PNG

This is how it's set up in Traktor:

https://dl.dropbox.com/u/7776728/traktorsms.png

So if I'm correct, the midi signals coming from the APC get routed to Midi Yoke 1, that's what Traktor picks up as the input. Traktor outputs the midi signals for the LEDS to Midi Yoke 2, the program routes that back to the APC. The input works fine, I can learn my hotcues, so they trigger fine. But the LED output isn't working, I can also learn those, but the leds just won't light up.

I've also tried the Ableton method by setting up two midi channels. The first one sends the signals from the APC to Midi Yoke 1, the second channel sends the midi signals from Midi Yoke 2 back to the APC. But no leds light up, while the buttons are still working fine though.

When I change the In and Out port in Traktor back to the APC20, everything works fine, besides the annoying distorted sound whenever I load a deck full of hotcues ofcourse ;)

I really don't know what I'm doing wrong since this is working for everyone else, ugh :(