Traktor 2.6 - Post Fader effects

Printable View

Show 40 post(s) from this thread on one page

10-04-2012, 03:34 PM
papo

Traktor 2.6 - Post Fader effects

I'm really excited about this. I can't wait to test it and I'm hoping it doesn't disappoint.

:thumbup::w00t:
10-04-2012, 04:05 PM
ksandvik

Seems HW is driving the NI SW release cycles so hopefully a 2.6.1 is not far behind 2.6.
10-04-2012, 05:18 PM
Stewe

Love the macro effects update!
10-04-2012, 05:43 PM
DJ 2 Cut

I cant wait to check out the Flux Mode. Need to find a button to map it to on my S2
10-04-2012, 05:47 PM
haze324

Quote:

Originally Posted by papo

I'm really excited about this. I can't wait to test it and I'm hoping it doesn't disappoint.

:thumbup::w00t:

Get yourself a DJM-800 already!!!!! What's up pimp how you been brother.
10-04-2012, 06:15 PM
papo

Quote:

Originally Posted by haze324

Get yourself a DJM-800 already!!!!! What's up pimp how you been brother.

LOL... I have been good bro. I little busy, that's why you haven't seen me on here much lately.

Doing any other venues in the hood??

I actually bought myself a TTM56 fairly cheap so that I can practice a little scratching with some HipHop tunes. Faders are beautiful.

Since it doesn't have on-board effects, I'm using the Audio8 and the TTM's send/returns for fx's. Post-Fader too!! lol

I lost your number when I bought a new phone. PM me with it so I can save it again!
10-04-2012, 08:46 PM
DJ Abide

Map-able Remix decks is the real question. Completely ignored by Ean in the vid so I'm thinking it might be there and DJTT isn't mentioning it to cling on to a few MF3D sales.
10-04-2012, 09:25 PM
photojojo

Quote:

Originally Posted by DJ Abide

Map-able Remix decks is the real question. Completely ignored by Ean in the vid so I'm thinking it might be there and DJTT isn't mentioning it to cling on to a few MF3D sales.

Did you see something specific that said they would be mappable? I think You'll get that little bit of control on the mixer with HID, but that's it.
10-05-2012, 02:16 AM
oneapemob

Yeahh i'm so happy for the post fader fx !
It seems as if NI is finally adding some stuff to the "base" of the software, and not inventing us a new way of sampling and creating crazy new workflows and such.

Maybe next on the list is improvements to the eqs ( makem' full kill without having to map it for ex. ), some flexibility for volume faders curves, maybe to the cross fader ( to add a dip in the middle for people that might want it ). After all now that their own mixer relies on internal eq and options, stuff like this should be coming, what with the incentive to actually sell this mixer to us :D

But i don't think we will see a revamped browser/manager before the v3.
10-25-2012, 02:27 PM
lysknapp

how do i turn on the post-fader FX?!??
10-25-2012, 02:36 PM
Stewe

Quote:

Originally Posted by lysknapp

how do i turn on the post-fader FX?!??

Drop menu where you change between group and single mode. Or with mapping command.
10-25-2012, 03:06 PM
Otacon

Quote:

Originally Posted by oneapemob

Yeahh i'm so happy for the post fader fx !
It seems as if NI is finally adding some stuff to the "base" of the software, and not inventing us a new way of sampling and creating crazy new workflows and such.

Maybe next on the list is improvements to the eqs ( makem' full kill without having to map it for ex. ), some flexibility for volume faders curves, maybe to the cross fader ( to add a dip in the middle for people that might want it ). After all now that their own mixer relies on internal eq and options, stuff like this should be coming, what with the incentive to actually sell this mixer to us :D

But i don't think we will see a revamped browser/manager before the v3.

they added full kill eq's in 2.6
10-25-2012, 07:14 PM
DjTerrible

Quote:

Originally Posted by DJ 2 Cut

I cant wait to check out the Flux Mode. Need to find a button to map it to on my S2

I'll map it to my SYNC button on my Denon MC3000, then just beatmatch manually... seems like a good compromise to me
10-25-2012, 09:54 PM
padi_04

loving the full kill eqs and post fader fx, meh on the macro fx.
10-26-2012, 01:37 AM
dirty moose

Are all the features for internal mode only?
10-26-2012, 02:53 AM
robdquick

Quote:

Originally Posted by DjTerrible

I'll map it to my SYNC button on my Denon MC3000, then just beatmatch manually... seems like a good compromise to me

My plan is to map it to the button below the FX1 knob (dry/wet) as this is currently used for nothing!
10-26-2012, 06:27 AM
photojojo

Quote:

Originally Posted by robdquick

My plan is to map it to the button below the FX1 knob (dry/wet) as this is currently used for nothing!

I don't really know that controller or what mapping you're using. I would bet though that the button you're talking about is used to turn on an effect when in single mode.
10-26-2012, 07:24 AM
robdquick

Quote:

Originally Posted by photojojo

I don't really know that controller or what mapping you're using. I would bet though that the button you're talking about is used to turn on an effect when in single mode.

Denon MC-6000. I've never used single mode, only group mode but yes you're probably right in that it turns on the effect, and then the other 3 buttons turn the different parameters on/off.
10-26-2012, 09:32 AM
Pearce161

Quote:

Originally Posted by robdquick

My plan is to map it to the button below the FX1 knob (dry/wet) as this is currently used for nothing!

Quote:

Originally Posted by photojojo

I don't really know that controller or what mapping you're using. I would bet though that the button you're talking about is used to turn on an effect when in single mode.

Thats how i did mine earlier its pretty easy and i've never mapped a thing before. There a tutorial on the NI site.

U use add in, 'flux on' and set it to toggle. Then put an add out 'flux state' to make the led light up when its on. (as a bonus it lights up brighter when flux engages). I did both sides fx1 for deck a and fx2 for deck b

Now gotta try an work out if you can still use it like normal, (ie to turn effect on when in single mode) using shift+.

got some reading to do about mapping I think.
10-26-2012, 09:37 AM
Pearce161

heres the tutorial, but on here they set it up to the sync button

http://www.native-instruments.com/kn...factory+map%29
10-26-2012, 12:11 PM
Bears'N'Backpacks

Quote:

Originally Posted by DJ Abide

Map-able Remix decks is the real question. Completely ignored by Ean in the vid so I'm thinking it might be there and DJTT isn't mentioning it to cling on to a few MF3D sales.

It could also be the fact that everybody already knew this update would not bring that functionality. Pretty cheap shot at a community you participate in. Poor form.
10-27-2012, 08:27 AM
photojojo

Quote:

Originally Posted by dj calkutta

do you gotta have a digital/midi mixer for post fader effects?...can this be done onna vestax 06 with an inno-fader?...like some how?
love the form fellas/this is the best place for dj's.props to djtt....all other sites dont know how a dj-worx.
viva la djtt

Post fader FX won't work in external mode as it's all a function of the software.
10-27-2012, 08:51 AM
fullenglishpint

1 Attachment(s)

Quote:

Originally Posted by photojojo

Post fader FX won't work in external mode as it's all a function of the software.

I came up with a kind of work round for this that won't give you true post fader FX, but does replicate the same thing with a button. You need these 2 commands mapped:

Attachment 13146

And then another button mapped to turn flux mode off. If you have a delay (or any other effect) running, the track is effectively silence allowing the effect to trail off. Unfortunately if you set the Flux on function to 'hold', it turns off before jumping forward as you release.
10-27-2012, 09:03 AM
photojojo

Well, there you go.
10-27-2012, 09:37 AM
Da3dalus

What are post fader effects ?
10-27-2012, 09:58 AM
fullenglishpint

Quote:

Originally Posted by Da3dalus

What are post fader effects ?

Effects that are applied to the track after the line fader. So if you have a delay post fader, you can pull down the fader and the delay trail will still continue.
10-27-2012, 11:25 AM
Sean_Boy87

Quote:

Originally Posted by dj calkutta

hey,
is there a thread that explains what all the new effects do?...like in depth?...thanks in advance.
j-kutta

http://www.native-instruments.com/#/...-z2/?page=5529
10-27-2012, 03:14 PM
padi_04

Quote:

Originally Posted by fullenglishpint

Effects that are applied to the track after the line fader. So if you have a delay post fader, you can pull down the fader and the delay trail will still continue.

It's also post line filters. Works as a charm with creating heavily delayed or verbed risers :)
10-28-2012, 06:06 AM
JesC

So can someone confirm the fx on external mode can be use post-fader?
10-28-2012, 06:13 AM
Stewe

Quote:

Originally Posted by dj calkutta

can somebody post a step by step 'for dummies like me,lol' on how to map a key to turn flux on and off to only deck B.
flux mode is the coolest thing for beat destruction....i kut with deck a,so all i need is deck B,but i suck at mapping.if anyone can help,that would be great.thanks in advance.
j-kutta

Just PM'd you!
10-28-2012, 06:14 AM
Stewe

Quote:

Originally Posted by DJ

So can someone confirm the fx on external mode can be use post-fader?

It's internal mixing feature.
10-28-2012, 06:28 AM
oneapemob

Quote:

Originally Posted by DJ

So can someone confirm the fx on external mode can be use post-fader?

Yes and no :D

Yes the fx in external mode can be used post fader (select "send" as a state of the fx in traktor, and route the connexions appropriately), but it isn't dependent on Traktor, it's dependent on wether your mixer has a send/return fx loop that can be used postfader (rane ttms, pioneer 707, 909, djm 500, 600, 700, 800, etc...). Because the connexion has to be physical.

No if your mixer doesn't have a physical send/return (djm T1) and you are using traktor in external mode.
10-28-2012, 03:12 PM
GRooVeZ

Quote:

Originally Posted by Stewe

Just PM'd you!

can u pm me the same thing plz?

thx!
10-28-2012, 03:21 PM
Stewe

Quote:

Originally Posted by GRooVeZ

can u pm me the same thing plz?

thx!

I have posted it in Tips n Tricks thread:

http://forum.djtechtools.com/showthr...l=1#post544514

Let me know if something is not clear :)
10-29-2012, 09:09 PM
keynote101

so the mixer NEEDS a send/return loop? Can the auxilary input/output box be suplimented for the send return?

Show 40 post(s) from this thread on one page

All times are GMT -5. The time now is 07:48 PM.