Suggestions for new computer please

I want to build a new computer for my setup. I need a desktop, not laptop, and there arn't many sujjestions out there. I definatly need it to work with Midifighter 3D, F1, S8. And I want it ready for Ableton, if I ever feel the urge :rolleyes:

Presently I have an Asus motherboard with an i3 and 4g ram and it seems when I plug the 3D and use a complex mapping I get skipping sounds... :( I'm pretty sure it's a conflict of some sort. The LOAD meter on Traktor is way below 50%...

Anyways any help would be appreciated. :001_wub:

Which Traktor mapping for MF 3D you're having issues with?

Are those issues happening with both S8 audio interface and built in computer sound card?

Tried to reinstall Traktor?

Questions for new computer = hardware question.


=> moving thread.

Thanks trekki and sorry.

Stewe: This whole story started when I got the Twister a few weeks ago. I worked on the problem with a tech from DTT. I even got so obessed as to re install everything. Windows and all. I keep this computer soley for Traktor so nothing else on it. The tech decided we needed to try a different unit so I asked him if instead of sending the Twister he could send the 3D... I was thinking it might have a simpler 'internal workings' AND I was also thinkng it would serve my needs more. My last conversation with the tech was him saying I must have a hardware conflict and he was ready to refund me. BUT that is not what I want. I want to get to the bottom of this. Plus I need another computer at work so this is the right time for me to switch.

So now my need is to know if anyone has experience with a good Desktop solution that works with my hardware.

Oh, but if you have ideas about why I'm having problems... I'm still willing to try and figure it out... :001_unsure:

Oh, almost forgot.. Yes I did try it with only the computer sound card and it did not solve the problem. Thank you

http://www.ebay.fr/sch/i.html?_from=...p2045573.m1684

I think its more conflict than hardware. It wouldn't hurt to replace the i3 with an i5 and increase your ram to 8GB (I'd recommend 8 as default anyways). Before building a whole new rig, look up your MB model, see what slot it is, and look to replace the processor and add RAM, but I think you are having more tech issues than power issues.
- Unreall

I've had a generic Dell PC and one i built myself with an AMD Athlon X4 and Asrock motherboard and neither had any problems supporting all of my hardware.

Quote:

---

Originally Posted by Unreallystic

I think its more conflict than hardware. It wouldn't hurt to replace the i3 with an i5 and increase your ram to 8GB (I'd recommend 8 as default anyways). Before building a whole new rig, look up your MB model, see what slot it is, and look to replace the processor and add RAM, but I think you are having more tech issues than power issues.
- Unreall

---

I'm thinking the same. It looks more like some kind of freak coinicidental conflict... And if that fonflict has anything to do with the motherboard adding mem and new CPU won't do a thing.

That is why I was hoping someone would be able tell what he has that works in the desktop category.

Thanks DJ Double You...

What model num is the Asrock?

Do you keep your BIOS version up to date? This is first step in optimizing your PC for DJing.

I also have i3 dual core with 4GB RAM in my Windows laptop and it's also struggling to properly run two decks in Traktor... I can use S2 with default mapping with no real problem but, as you already said it, any complex mapping chokes the CPU and I don't even have the Key locked.

i5 dual core with 8GB runs things more smoothly but I wouldn't guarantee no spikes and pops at all while using Keylock and complex setup.

I'd only make sure that the processor is some i5 quad core with 8GB DDR3 2400Mhz and you're all set.

Quote:

---

Originally Posted by YvesD

Thanks DJ Double You...

What model num is the Asrock?

---

It was an asrock fm2a88m extreme6+ but man I think 99% of the setups do not have any problems so I think you should not focus too much on this specific motherboard (great motherboard though)

Quote:

---

Originally Posted by DJDoubleYou

It was an asrock fm2a88m extreme6+ but man I think 99% of the setups do not have any problems so I think you should not focus too much on this specific motherboard (great motherboard though)

---

Quote:

---

Originally Posted by Stewe

Do you keep your BIOS version up to date? This is first step in optimizing your PC for DJing.

I also have i3 dual core with 4GB RAM in my Windows laptop and it's also struggling to properly run two decks in Traktor... I can use S2 with default mapping with no real problem but, as you already said it, any complex mapping chokes the CPU and I don't even have the Key locked.

i5 dual core with 8GB runs things more smoothly but I wouldn't guarantee no spikes and pops at all while using Keylock and complex setup.

I'd only make sure that the processor is some i5 quad core with 8GB DDR3 2400Mhz and you're all set.

---

Thank you to both of you. I'll go all out with an i7 8gb ddr3 and lots of mhz. If that dosn't work I'll sell it all get two turn tables with a good Pioneer Mixer and learn the old way of Djing. :001_unsure:

PS I can't believe DJTechTools doesn't know what a DJ plays ????????? :p

Well I took a while but I just finished up a computer build. It's an MSI Z97 with an i7 CPU. 4 mhz .. Usb 3 all the trimings... AND ABSOLUTLY NO CHANGE IN MY PROBLEM !

I am lost here...

EVEN when I un plug the S8 and use the motherboard sound card.. It still skips like hell when I press the shit button on the Midifighter with Beaubryte All-in-one mapping !

Help... Please

Oh yeah wanted to add.... I did a mapping to test things.. It seems the problem is with Traktor OUT mappings. As soon as you add too many everything goes bonkers....:blink:

Quote:

---

Originally Posted by YvesD

Well I took a while but I just finished up a computer build. It's an MSI Z97 with an i7 CPU. 4 mhz .. Usb 3 all the trimings... AND ABSOLUTLY NO CHANGE IN MY PROBLEM !

I am lost here...

EVEN when I un plug the S8 and use the motherboard sound card.. It still skips like hell when I press the shit button on the Midifighter with Beaubryte All-in-one mapping !

Help... Please

---

I am completely lost on this as well, did you start with a fresh windows instalation?

Yes fresh new everything... lolll... The only thing that remaines the same is the installation disk. It's a windows Ultimat !
.... Maybe I should try windows 8 or 10 ?? I don't like the new interface on those windows... But it might be worth a try.

What do you think ?

Quote:

---

Originally Posted by YvesD

Yes fresh new everything... lolll... The only thing that remaines the same is the installation disk. It's a windows Ultimat !
.... Maybe I should try windows 8 or 10 ?? I don't like the new interface on those windows... But it might be worth a try.

What do you think ?

---

I have no idea if it would help but Windows 10 is not too bad nonetheless so you might as well try it?

Well do that... I'll report back with results. Thank you

.... NO GO ! .... :(

It has to be something in the water here in my home town !!!!! ..... :( :(

.. I'm making jokes.. But this is really bumming me out !!!.... AND I'M OBESSESD with figuring it out
I have a friend who has a MAC BOOK ! I'm going to borrowit !!!!

I made an 24 LED VU meter running on a Teensy Board. Really simple programming where traktor just sends the LED out put...

Even that causes Buffer Underruns ! :( :confused:

KINDA SOLVED !

My Traktor Setting.tsi file must of had something worng in it. I installed everything and instead of copying my backup or the ROOT directory I started from scratch. And everything worked fine. Then I started to bring back one by one the backup directories from the old ROOT. When I finally got to the TSI file.. The problem came back!

Anyone know what could have done this in the TSI file ?

Thanks for your help