Hi
I have a numark party mix controller.
This controller have 4 pads and a pad button to choose from cues, loops, sampler and effects. I want to map the outputs for example the cues leds but if I want to change the pad mode from the button I want all of the leds to turn off but I want to when I return to cues they light as they were. How can I do that?
Firstly you have to check if the note assignment or midi channel changes when you switch between those four modes. If so you simply add output commands and map them in different modes and if it's not than you will have to use modifiers.Quote:
Originally Posted by Naughtvboy
I used modifiers off course modifier 2 value 1 - 4 for all the 4 layers and yes midi channel changes. Like I said I want to map the outputs for example the cues leds but if I want to change the pad mode from the button I want all of the leds to turn off but I want to when I return to cues they light as they were. How can I do that?
I used modifiers off course modifier 2 value 1 - 4 for all the 4 layers and yes midi channel changes but only the button to change layer change the note. The pads remain the same channel. Like I said I want to map the outputs for example the hot cues leds and then change to effects or loops it changes the led lighting for that corresponding layer. But then when I return to hot cues they light as they were. How can I do that?Quote:
Originally Posted by Stewe
Oh it makes more sense now. Sounds like a battle of modifiers :)Quote:
Originally Posted by Naughtvboy
If that's the case than you won't be needing Traktor's modifiers because your controller has it's own sort of modifier built in.Quote:
midi channel changes but only the button to change layer change the note
Just be sure to switch to correct hardware page that corresponds to commands that you're mapping at the moment. Should work nicely after that.
It doesn't work like you said. It works only with modifiers. My inputs are not the problem. I can map them no problem at all. What I am stuck with is the led outputs for each layer. What is happening is if for example I have a hotcue 1 on the led is on then, when I change to another layer like effects it stays on even if the effects button is off which is the same.
Ha, don't blame me :) you said that id does switch midi channel (or Note) so it made me think there is a built in modifier...Quote:
Originally Posted by Naughtvboy
Ok let's try with adding the Monitor State command: Add In > Global > Send Monitor State - map it to your layer switch buttons. This command basically forces Traktor to refresh the controller output in case that your controller have issues with that. Let me know if that does it.
I think this solved my problem but not completely. What it does is refreshing the leds but does not return to the original leds that were on.Quote:
Originally Posted by Stewe
Thanks
Can you please upload your mapping for me to investigate? My guess is that the problem is caused by incorrect modifier assignments.Quote:
Originally Posted by Naughtvboy
Ill upload later this afternoon. I have a map separately for everything like decks effects and loops. I have around 9 maps because I made deck a anf b separately. Because of this traktor lags a bit. I dont know how others make maps professionally.
It all comes down to how many modifiers you have to spend for your entire mapping. If you don't need more than 16 than you are good with only two mapping devices (8 mods per each device is available)Quote:
Originally Posted by Naughtvboy
You can use software such as CMDR (Windows) or Xtreme Mappings (OS X) to easily merge your devices in to only one or a few more mapping devices. Again, it all depends on how many modifiers are involved.
Just to mention why does the mappings for traktor 2 does not work on traktor 1. I have a netbook with windows xp. And am mapping with traktor 1. Because it is a slow cpu pc and traktor 2 does not even run.
That's mainly because NI has remained or moved commands from one group to the other. However about 80% of commands from TP1 will work in TP2.Quote:
Originally Posted by Naughtvboy