The VCI-100SE 3.6.4 Mapping for Traktor Pro 2

Attached at the bottom of this post are slightly updated versions of our VCI-100SE 3.6.4 mapping for Traktor Pro 2 (for VCI-100 FW 1.3 & FW 1.4).

The main functionality of the mappings has not changed, I simply made sure that the layout and effect settings import the same as they did on the old Traktor Pro (so you can still use the VCI-100 as if nothing changed). I also added in the 4 new effects to the effect settings so you can access them in the "Control FX" section (via Shift+FX knobs).

There are no longer PC or MAC versions because the infamous "glitch" issue is no longer a problem in Traktor 2 (based on my testing), so PC people can once again get LED feedback with the Route FX buttons. Also, I previously reported that there were some LED issues in TPro2 using the 3.6.4 mapping but that was with a beta version of TPro2 so rest assured that the LED feedback should be fine.

Just to clarify, DJ Techtools is planning on making a new mapping and overlay for the VCI-100 with Traktor Pro 2 with new functionality but this is not it. There is another thread I made for suggestions or requests for features to be included in that upcoming mapping here: http://www.djtechtools.com/forum/sho...d.php?p=262979

Please only use this thread for comments or issues regarding this v3.6.4 (TPro2) mapping. Thanks!

it's saying the zip is invalid

Works for me.

loaded fine, que leds dont seem to be working(headphone button)... also bleed thru? first time firing up TP2, maybe its suppose to be like that....


edit: nevermind no bleeding! restart fixed the led problems too

Just tried it out and it works for me too. Can't wait for the mapping that makes use of those sample decks! :)

Nice stuff!

One question... i'm not sure if this issue is linked to Traktor 2 or the mapping...
Under Traktor 1 when you play a track and hit Sync on the other deck (not playing yet), it'll lock the BPM with the master deck.
When you push Sync again, the BPM will remain, but now the "lock" has switched off.
Under Traktor 2 this doesn't seem to happen. Once the second deck is Synced you can start playing and then switch off Sync to keep the BPM the same (but allow phase shift)... but thats totally counter-intuitive to how it used to be.

Is this an issue with the new TSI mapping doing some sort of "revert to original BPM" when Sync is switched off? Or is this something to do with Traktor 2?

I have a mayor issue with this, and the official Traktor 1 vci 100 mapping, IN Traktor 2.

When i beat match manually, pitch bend and move the pitch fader simultaneously, the bpm either goes sky high or low.

EDIT:

It also occurs with the standard VCI-100 mapping(From vestax, which is native in traktor). But it doesn't happen in Traktor 1.

I get this every time I download the zip file and try to extract it.

http://img.photobucket.com/albums/v6...pboard01-2.jpg

http://thedopereport.com/photos/110-...razy_pills.jpg

Works great for me! Thanks guys at DJTT

Quote:

---

Originally Posted by viirus::..

i get this every time i download the zip file and try to extract it.

http://img.photobucket.com/albums/v6...pboard01-2.jpg

http://thedopereport.com/photos/110-...razy_pills.jpg

---

same here viirus... :/ this sucks.

Quote:

---

Originally Posted by Viirus::..

I get this every time I download the zip file and try to extract it.

http://img.photobucket.com/albums/v6...pboard01-2.jpg

---

Try using 7-zip, it's free and great...http://www.7-zip.org/

works fine for me, thanks for this! I'm so siked for the new mapping and overlay tho!

<3 DJTT

Quote:

---

Originally Posted by flashflooder

Try using 7-zip, it's free and great...http://www.7-zip.org/

---

still nothing >_< all my hard earned money blown so far bec i cant get this to work. This is a long shot but does anyone live in the Palm Springs area or anywhere in Southern California that can show me how to do this correctly?

thanks for this! however i have one question. I am having an issue with the effects settings not importing correctly

It opened fine for me.. I unpacked and repacked , see if this works.

http://dl.dropbox.com/u/2014550/VCI-....4%20TPro2.zip

Quote:

---

Originally Posted by NewManSoon

It opened fine for me.. I unpacked and repacked , see if this works.

http://dl.dropbox.com/u/2014550/VCI-....4%20TPro2.zip

---

THANKS!!! this one worked :D

Quote:

---

Originally Posted by Nannou

Nice stuff!

One question... i'm not sure if this issue is linked to Traktor 2 or the mapping...
Under Traktor 1 when you play a track and hit Sync on the other deck (not playing yet), it'll lock the BPM with the master deck.
When you push Sync again, the BPM will remain, but now the "lock" has switched off.
Under Traktor 2 this doesn't seem to happen. Once the second deck is Synced you can start playing and then switch off Sync to keep the BPM the same (but allow phase shift)... but thats totally counter-intuitive to how it used to be.

Is this an issue with the new TSI mapping doing some sort of "revert to original BPM" when Sync is switched off? Or is this something to do with Traktor 2?

---

I have the same issue. FX don't seem to be working either. The buttons work and FX turn on but can't actually here them?

Any ideas?? tried importing a few times and closing and opening.:confused:

When I use shift+fx knob to browse though the effects I notice that tape delay is automatically activated whenever I pass by that effect.

Does this happen for anyone else?

Quote:

---

Originally Posted by Okänd

When I use shift+fx knob to browse though the effects I notice that tape delay is automatically activated whenever I pass by that effect.

Does this happen for anyone else?

---

You may have saved the preset for that effect to be on when selected. Try turning it off and then pressing the little save button on the effect deck, that might fix your problem.

Quote:

---

Originally Posted by fellis

You may have saved the preset for that effect to be on when selected. Try turning it off and then pressing the little save button on the effect deck, that might fix your problem.

---

Yeah, that was it. Thanks.

i know this is rather too obvious a question...... but is there any kind of rough ETA on when a Pro 2 mapping might be coming out?

Nope. When it's ready!

:o)

The File .zip is empty!!

E: I was having issues but I appear to have solved them. Can't wait for the new TSI!

The file .Zip is Empty!! not work!!

Hey all.

I have the 3.6.4 TSI on TP2 - all working fine apart from the play button does not light up blue when played.

Any ideas????

Thanks
G.

Probably the LED output in traktor is messed up. U can map it in.

Do you know how to do this? Sorry (never really went into the individual mapping settings with traktor)

Thanks
G

ALright u have to find the play pause trigger in the mappings. But ur looking for the play pause out. There might be one already for the other side but if not then u have to add one to the out of the specific button u are pushing. Also just try reloading the mapping a couple times

Quote:

---

Originally Posted by BennyJ

ALright u have to find the play pause trigger in the mappings. But ur looking for the play pause out. There might be one already for the other side but if not then u have to add one to the out of the specific button u are pushing. Also just try reloading the mapping a couple times

---

I have tried to load the mapping a couple of times but no joy.

I can see Play Pause out's - there are there for decks a, b c & d.

any ideas??

Is there a way to highlight decks C and D with the new VCI-100SE 3.6.4 traktor pro 2 .tsi mapping? I was able to see the highlighted deck on firmware 1.2.

I use four decks and sometimes I can't tell if the signal to switch between decks is working. I have to learn the hard way when I accidentally hit the cue button for Deck A or B. I use Deck C and D to play all of my dj tools. I have battling this issue for the past 2 weeks.

Please help!

Hi Guys!

I have a problem with the 3.6.4 mapping and Traktor Pro 2.
When I simultanously adjust the Pitch and turn the jogwheel either in scratch or CDJ-Mode the BPM makes huges Jumps in the direction I push.

Example
Track BPM is 126
I pull the Pitch downwards and push the jogwheel clockwise
BAM-> New BPM now is 170

With Traktor Pro 1 and 3.6.4 mapping everything works fine. what could this be?

Go to the Controller Tab in Traktor, select the Tempo Fader command and on Interaction Mode change to "Direct." Repeat this for all your decks. I had the same problem about 2 weeks ago.

yeah that worked perfectly! thanks!!!
I changed even the commands commented with Slice and Echo to Direct - is that correct?

greetz

Everything works great, but I'm getting no response from the crossfader and volume faders.

EDIT: issues was in my output routing, NOT MAPPING

Quote:

---

Originally Posted by Metrojolt

Everything works great, but I'm getting no response from the crossfader and volume faders.

EDIT: issues was in my output routing, NOT MAPPING

---

Yep, had the same problem, seems to be a default setting. Besides that, everything works well!

Good job :)

@Pedrotax, loving your sig :D

im on 1.3fw and im getting alot of lag and popping....idk what it is. i dont get it when i use tp1 tho

RAISE your latency. The total figure TP2 gives will be higher than TP1 because of the way it displays it. I forget which way round it is, but in TP1, one of the kinds of latency you see in TP2 was invisible.

EDITED FOR STUPIDITY